Stock class racing seats

Jeremy · 01-14-2013, 01:37 PM

I was just wondering if anyone has any thoughts on the Jaz Polyethylene racing seats? Also do you think are the Summit/Jegs brand the same as the Jaz brand?
Thanks Jerry

Jim Kaekel · 01-14-2013, 03:26 PM

You would be better off in the long run with an aluminum seat. The plastic seats have molded-in threads that can pull-out over time. A friend has one of those in a bracket car and after two years, the threads are already starting to pull-out of the seat, and he's not a real heavy fellow either. My .02.

Mark Markow · 01-14-2013, 09:58 PM

Quote:

Originally Posted by Jim Kaekel

You would be better off in the long run with an aluminum seat. The plastic seats have molded-in threads that can pull-out over time. A friend has one of those in a bracket car and after two years, the threads are already starting to pull-out of the seat, and he's not a real heavy fellow either. My .02.

x-s2 on the aluminum seats. leave the poly seats to the grade school cafeteria's

Phillip marvetz · 01-15-2013, 02:13 AM

Chad should be here any second to scold you.

Chad Rhodes · 01-18-2013, 09:40 AM

Quote:

Originally Posted by Phillip marvetz

Chad should be here any second to scold you.

poly seats belong in dune buggies ( or Phillip's car). As much as I disliked being required to run seats that in some cases are over 50 years old, installing a plastic one with molded in "inserts" seems even worse. There Phillip, are you happy now. Wasn't even going to reply till i read your reply.

Bob Bender · 01-18-2013, 11:42 AM

I will keep my bench.....

Mark Yacavone · 01-18-2013, 12:38 PM

Quote:

Originally Posted by Bob Bender

I will keep my bench.....

You daredevil, you

Ed Wright · 01-18-2013, 12:48 PM

Quote:

Originally Posted by Jim Kaekel

You would be better off in the long run with an aluminum seat. The plastic seats have molded-in threads that can pull-out over time. A friend has one of those in a bracket car and after two years, the threads are already starting to pull-out of the seat, and he's not a real heavy fellow either. My .02.

Mine have through bolts. I can't imagine anybody trusting threaded bolt holes I. Their seats, no matter what they are made of.

Mike Pearson · 01-18-2013, 01:53 PM

Quote:

Originally Posted by Jeremy

I was just wondering if anyone has any thoughts on the Jaz Polyethylene racing seats? Also do you think are the Summit/Jegs brand the same as the Jaz brand?
Thanks Jerry

I think I have the summit seats. I have the driver side thru bolted to the floor and cage. Nice comfortable seat. Light weight too.

SuperStockDodge · 01-18-2013, 07:40 PM

Quote:

Originally Posted by Bob Bender

I will keep my bench.....

Thumbs up Bob!!!

01-14-2013, 01:37 PM	#1
Jeremy Junior Member Join Date: Dec 2002 Posts: 95 Likes: 0 Liked 1 Time in 1 Post	Stock class racing seats I was just wondering if anyone has any thoughts on the Jaz Polyethylene racing seats? Also do you think are the Summit/Jegs brand the same as the Jaz brand? Thanks Jerry

01-14-2013, 03:26 PM	#2
Jim Kaekel VIP Member Join Date: Jul 2002 Location: Michigan Posts: 1,226 Likes: 133 Liked 529 Times in 107 Posts	Re: Stock class racing seats You would be better off in the long run with an aluminum seat. The plastic seats have molded-in threads that can pull-out over time. A friend has one of those in a bracket car and after two years, the threads are already starting to pull-out of the seat, and he's not a real heavy fellow either. My .02. __________________ Jim Kaekel 3836 STK

01-15-2013, 02:13 AM	#4
Phillip marvetz Senior Member Join Date: Oct 2008 Location: Lynden ,WA Posts: 820 Likes: 0 Liked 3 Times in 3 Posts	Re: Stock class racing seats Chad should be here any second to scold you. __________________ 2009 V/SA Record Holder

01-18-2013, 11:42 AM	#6
Bob Bender VIP Member Join Date: Jan 2009 Location: Maryland Posts: 1,729 Likes: 1,595 Liked 459 Times in 90 Posts	Re: Stock class racing seats I will keep my bench..... __________________ Bob Bender 144 O/SA 2010-2012 National Record Holder