Oil pump for stock class, sbc

Lonnie Cox · 04-03-2012, 01:03 PM

Please just want to know, what pump will work the best and not rob H/P
Thank You

Ed Wright · 04-03-2012, 01:26 PM

Call Larry Stewart Sr at 601-259-1597.

Wade_Owens · 04-03-2012, 01:31 PM

Quote:

Originally Posted by Ed Wright

Call Larry Stewart Sr at 601-259-1597.

x2, Larry's stuff is dead accurate and doesnt cavitate. NEVER had a problem, even with low oil levels or a lighter type oil...

Wade O

Joe Schaechter · 04-03-2012, 02:08 PM

Schumann makes a nice pump.

http://schumannsdynamicperformance.c...31441/SBC140LV

Alan Roehrich · 04-03-2012, 03:11 PM

Yep, that Schumann pump is a nice piece. If the low volume version makes you nervous, they have a standard volume version. I've been really happy with the Schumann pumps, they're made out of the same material as heavy rear end housings are made out of, plus they have billet gears, not powdered metal, and they have a screened bypass that dumps excess pressure and volume to the pan, instead of recirculating it to the inlet, where it heats the oil and aerates it.

Signman · 04-04-2012, 10:23 AM

Stewart Pump for SBC. Used 1 season. Very good condition.
Make a fair offer.

signman1946@gmail.com

Jeff Lee · 04-04-2012, 08:07 PM

Quote:

Originally Posted by Alan Roehrich

Yep, that Schumann pump is a nice piece. If the low volume version makes you nervous, they have a standard volume version. I've been really happy with the Schumann pumps, they're made out of the same material as heavy rear end housings are made out of, plus they have billet gears, not powdered metal, and they have a screened bypass that dumps excess pressure and volume to the pan, instead of recirculating it to the inlet, where it heats the oil and aerates it.

Do you have a direct contact source? I want to inquire on an AMC build.
Thanks.

Alan Roehrich · 04-04-2012, 08:14 PM

http://www.schumannsdynamicperformance.com/

The owner's name is Vergne Schumann.

I don't see a listing for anything AMC, but he makes stuff for Oldsmobile, so the possibility does exist. Vergne is real sharp, but he's kind of blunt.

Jeff Lee · 04-07-2012, 12:57 AM

Thanks, l will call him next week.
Blunt and I get along real good...

alejan1975 · 11-25-2013, 01:31 PM

resurrecting an old thread here, but didn't think it necessarily should start anew.

Looking into a low volume oil pump for a SBF for stock eliminator. Schumann at one time had one listed, but i do not see this on their website anymore.

Jegs has a Low vol pump w/ cut down gears (.660" vs .875" stock) and a 40 psi pressure relief spring for ~$200.

I don't see any other options on the interweb and wanted to see if anyone had any experience w/ the jegs piece, or thoughts on a 25% reduction in gear thickness and 40 psi relief.

I'm inclined to give it a try but thought i'd ask first.

Thanks in advance!

Alex

04-03-2012, 01:03 PM	#1
Lonnie Cox Junior Member Join Date: May 2010 Posts: 88 Likes: 0 Liked 0 Times in 0 Posts	Oil pump for stock class, sbc Please just want to know, what pump will work the best and not rob H/P Thank You

04-03-2012, 01:26 PM	#2
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Oil pump for stock class, sbc Call Larry Stewart Sr at 601-259-1597. __________________ Ed Wright 4156 SS/JA

04-03-2012, 02:08 PM	#4
Joe Schaechter Member Join Date: Mar 2006 Location: Moline, Illlinois Posts: 194 Likes: 1 Liked 13 Times in 4 Posts	Re: Oil pump for stock class, sbc Schumann makes a nice pump. http://schumannsdynamicperformance.c...31441/SBC140LV __________________ Joe Schaechter 3168 STK

04-03-2012, 03:11 PM	#5
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,090 Likes: 1,534 Liked 1,758 Times in 398 Posts	Re: Oil pump for stock class, sbc Yep, that Schumann pump is a nice piece. If the low volume version makes you nervous, they have a standard volume version. I've been really happy with the Schumann pumps, they're made out of the same material as heavy rear end housings are made out of, plus they have billet gears, not powdered metal, and they have a screened bypass that dumps excess pressure and volume to the pan, instead of recirculating it to the inlet, where it heats the oil and aerates it. __________________ Alan Roehrich 212A G/S

04-04-2012, 10:23 AM	#6
Signman Senior Member Join Date: Oct 2003 Location: Lower Slower Delaware Posts: 535 Likes: 22 Liked 269 Times in 99 Posts	Re: Oil pump for stock class, sbc Stewart Pump for SBC. Used 1 season. Very good condition. Make a fair offer. signman1946@gmail.com __________________ Frank Ferrucci I/SA 1271 "Be Thankful for the Gifts You are Given"

04-04-2012, 08:14 PM	#8
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,090 Likes: 1,534 Liked 1,758 Times in 398 Posts	Re: Oil pump for stock class, sbc http://www.schumannsdynamicperformance.com/ The owner's name is Vergne Schumann. I don't see a listing for anything AMC, but he makes stuff for Oldsmobile, so the possibility does exist. Vergne is real sharp, but he's kind of blunt. __________________ Alan Roehrich 212A G/S

04-07-2012, 12:57 AM	#9
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Oil pump for stock class, sbc Thanks, l will call him next week. Blunt and I get along real good... __________________ Jeff Lee 7494 D/S '70 AMX

11-25-2013, 01:31 PM	#10
alejan1975 Junior Member Join Date: Oct 2013 Location: Southern PA Posts: 30 Likes: 0 Liked 0 Times in 0 Posts	Re: Oil pump for stock class, sbc resurrecting an old thread here, but didn't think it necessarily should start anew. Looking into a low volume oil pump for a SBF for stock eliminator. Schumann at one time had one listed, but i do not see this on their website anymore. Jegs has a Low vol pump w/ cut down gears (.660" vs .875" stock) and a 40 psi pressure relief spring for ~$200. I don't see any other options on the interweb and wanted to see if anyone had any experience w/ the jegs piece, or thoughts on a 25% reduction in gear thickness and 40 psi relief. I'm inclined to give it a try but thought i'd ask first. Thanks in advance! Alex __________________ Alex Cummings Newb