Flat towing with no e-brake

Kris Kristofferson · 06-15-2011, 10:07 PM

Hey guys,
I tracked down a set of free wheeling tow hubs. I will buy a tow bar etc soon as well,,

The only problem so far I am encountering is that I cannot use my emergency brakes. My c-clip eliminator block prevents me from using my parking brake. The "block" portion is too large to allow the brace to pass through the wheel cylinder - c-clip block opening. I tried to weld together a thinner piece for the brace but it does not seem to work..
So, I was wondering instead of putting it in neutral and applying the parking brake, can I just leave the trans in park when using the hubs? OR is it hard on the drive line??
Thanks,
Kris

06-15-2011, 10:07 PM	#1
Kris Kristofferson Junior Member Join Date: Nov 2009 Location: Ottawa, Ont Posts: 68 Likes: 1 Liked 0 Times in 0 Posts	Flat towing with no e-brake Hey guys, I tracked down a set of free wheeling tow hubs. I will buy a tow bar etc soon as well,, The only problem so far I am encountering is that I cannot use my emergency brakes. My c-clip eliminator block prevents me from using my parking brake. The "block" portion is too large to allow the brace to pass through the wheel cylinder - c-clip block opening. I tried to weld together a thinner piece for the brace but it does not seem to work.. So, I was wondering instead of putting it in neutral and applying the parking brake, can I just leave the trans in park when using the hubs? OR is it hard on the drive line?? Thanks, Kris __________________ http://www.youtube.com/watch?v=h2qQX4TDTVU