Cage rule help

will prater · 03-10-2010, 10:54 AM

I have a '68 Dart that started as a hemi clone. I cannot run the car as an AH ($$$) but would like to try a GT class w/383. I have a question about the 10pt cage currently installed. There are 6x6 plates welded to the floor under all the up right bars but there is no rocker bar. Reading the rules I don't quite understand when the lower bar is required. My rule book is old and so am I.
Thanks

raceewing · 03-10-2010, 11:50 AM

Will I have a 68 Hemi clone and just raced it at atlanta points meet. It runs GT/EA and does't have a rocker bar. Had it certified at the track.

buzzinhalfdozen · 03-10-2010, 12:52 PM

The rocker bar is only required if car does not have stock floors, beyond the allowable 6 square feet of tunnel for trans access. Joe

will prater · 03-10-2010, 02:14 PM

Thanks for the replies. One less thing to have to change or worry about for now.

03-10-2010, 10:54 AM	#1
will prater Member Join Date: Sep 2002 Location: Carthage, MO Posts: 108 Likes: 2 Liked 7 Times in 4 Posts	Cage rule help I have a '68 Dart that started as a hemi clone. I cannot run the car as an AH ($$$) but would like to try a GT class w/383. I have a question about the 10pt cage currently installed. There are 6x6 plates welded to the floor under all the up right bars but there is no rocker bar. Reading the rules I don't quite understand when the lower bar is required. My rule book is old and so am I. Thanks

03-10-2010, 11:50 AM	#2
raceewing Junior Member Join Date: May 2006 Location: usa Posts: 24 Likes: 0 Liked 0 Times in 0 Posts	Re: Cage rule help Will I have a 68 Hemi clone and just raced it at atlanta points meet. It runs GT/EA and does't have a rocker bar. Had it certified at the track.

03-10-2010, 12:52 PM	#3
buzzinhalfdozen Senior Member Join Date: Sep 2006 Location: Bellevue Ohio Posts: 984 Likes: 0 Liked 11 Times in 8 Posts	Re: Cage rule help The rocker bar is only required if car does not have stock floors, beyond the allowable 6 square feet of tunnel for trans access. Joe __________________ Joe Buchanan SS/BX 3117

03-10-2010, 02:14 PM	#4
will prater Member Join Date: Sep 2002 Location: Carthage, MO Posts: 108 Likes: 2 Liked 7 Times in 4 Posts	Re: Cage rule help Thanks for the replies. One less thing to have to change or worry about for now.