fwd trany help

larry dowty · 03-31-2009, 12:28 PM

does any body know the exact distance between the transfer gears on a 31th chrysler fwd 3 speed or also called the 404?

Rob Lloyd · 03-31-2009, 08:17 PM

Quote:

Originally Posted by larry dowty

does any body know the exact distance between the transfer gears on a 31th chrysler fwd 3 speed or also called the 404?

You going to have some 1.50 transfer gears made up? I'd like a set...

Sorry, I don't know the answer to your question, though. I bet John Donato could answer that.

larry dowty · 03-31-2009, 08:53 PM

hello rob i am building some gears that are a little deeper than that, do you have some contact info for john? and send me a email at pamlarrydowty@msn.com and we can talk Q.T. LOL

art leong · 04-01-2009, 06:31 AM

I'm working on it Larry. Put a couple of calls out waiting for a response.

larry dowty · 04-01-2009, 10:49 AM

art my friend at the trany shop will have one for me to measure thur. then i can forward.but it would be nice to know exact 120 mm and 4.3/4 are to close to guess

Owen S Quirion · 04-02-2009, 06:29 AM

Larry, What are you putting the Mopar trans into?

larry dowty · 04-02-2009, 10:48 AM

hello owen it is for art leongs fwd car i have a new 95 mustang stocker that i will race this year how is your car ?

Rob Lloyd · 04-02-2009, 01:11 PM

Quote:

Originally Posted by larry dowty

hello rob i am building some gears that are a little deeper than that, do you have some contact info for john? and send me a email at pamlarrydowty@msn.com and we can talk Q.T. LOL

Mail sent!

Owen S Quirion · 04-03-2009, 06:10 AM

Larry, I am working on some new ideas this spring that should help out a little bit. We had it running good last fall. I think we are finally getting a handle on the tune up. These FWD cars are hard to predict when there is wind or bad air. I did a lot of data crunching this winter and have made a lot of progress. The fuel map will be a lot closer now.

larry dowty · 04-03-2009, 10:57 AM

owen i still have some gear blanks would you like them i have no use for them?

03-31-2009, 12:28 PM	#1
larry dowty Member Join Date: Jan 2005 Location: chewelah wa Posts: 283 Likes: 0 Liked 11 Times in 4 Posts	fwd trany help does any body know the exact distance between the transfer gears on a 31th chrysler fwd 3 speed or also called the 404?

03-31-2009, 08:53 PM	#3
larry dowty Member Join Date: Jan 2005 Location: chewelah wa Posts: 283 Likes: 0 Liked 11 Times in 4 Posts	Re: fwd trany help hello rob i am building some gears that are a little deeper than that, do you have some contact info for john? and send me a email at pamlarrydowty@msn.com and we can talk Q.T. LOL

04-01-2009, 06:31 AM	#4
art leong VIP Member Join Date: Dec 2001 Location: Richmond Hill, Georgia Posts: 2,003 Likes: 0 Liked 1 Time in 1 Post	Re: fwd trany help I'm working on it Larry. Put a couple of calls out waiting for a response. __________________ Art Leong 2095 SS

04-01-2009, 10:49 AM	#5
larry dowty Member Join Date: Jan 2005 Location: chewelah wa Posts: 283 Likes: 0 Liked 11 Times in 4 Posts	Re: fwd trany help art my friend at the trany shop will have one for me to measure thur. then i can forward.but it would be nice to know exact 120 mm and 4.3/4 are to close to guess

04-02-2009, 06:29 AM	#6
Owen S Quirion Junior Member Join Date: May 2005 Location: Captiol District of New York Posts: 71 Likes: 0 Liked 0 Times in 0 Posts	Re: fwd trany help Larry, What are you putting the Mopar trans into? __________________ BF/S 1985 Grand Am 3.0 V6

04-02-2009, 10:48 AM	#7
larry dowty Member Join Date: Jan 2005 Location: chewelah wa Posts: 283 Likes: 0 Liked 11 Times in 4 Posts	Re: fwd trany help hello owen it is for art leongs fwd car i have a new 95 mustang stocker that i will race this year how is your car ?

04-03-2009, 06:10 AM	#9
Owen S Quirion Junior Member Join Date: May 2005 Location: Captiol District of New York Posts: 71 Likes: 0 Liked 0 Times in 0 Posts	Re: fwd trany help Larry, I am working on some new ideas this spring that should help out a little bit. We had it running good last fall. I think we are finally getting a handle on the tune up. These FWD cars are hard to predict when there is wind or bad air. I did a lot of data crunching this winter and have made a lot of progress. The fuel map will be a lot closer now. __________________ BF/S 1985 Grand Am 3.0 V6

04-03-2009, 10:57 AM	#10
larry dowty Member Join Date: Jan 2005 Location: chewelah wa Posts: 283 Likes: 0 Liked 11 Times in 4 Posts	Re: fwd trany help owen i still have some gear blanks would you like them i have no use for them?