retarding timing in high gear on a stocker - Page 2

Mark Yacavone · 07-12-2020, 01:23 AM

Quote:

Originally Posted by MR DERBY CITY

This is old news here,...can anyone say MSD grid ???? and you don’t need a sensor on the driveshaft to make this work....

I know that, but I bet it's all new to more than a few here. ;-)

Kenny Bomar · 07-12-2020, 10:06 PM

Quote:

Originally Posted by Adger Smith

back in the early 70's I took out 3-7 depending on the air in 3rd or 4th gear of my Z-28. Used an off set dual point distributor and switches on the shifter. Helped a few numbers and MPH, but most of all it let me run real high timing in low and second gear where it needed it.
Ed Wright remember those days??

Use to do the same w my b/sa camaro in the 70s it worked!!

MR DERBY CITY · 07-12-2020, 10:55 PM

Quote:

Originally Posted by Mark Yacavone

I know that, but I bet it's all new to more than a few here. ;-)

Never doubted YOU for a minute.....ole OBI WAN YAC .....

Ed Wright · 07-13-2020, 05:02 PM

Been running my cars like that for over ten years. Nothing new.
I used to do it with dual point distributors.
Now, with my FAST XFI, is figured out how to do that using “PA” (Power Adder Mode), and do it by time & RPM, instead of flipping a switch. I don’t remember the last car where I used the same timing in each gear.

07-13-2020, 05:02 PM	#14
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: retarding timing in high gear on a stocker Been running my cars like that for over ten years. Nothing new. I used to do it with dual point distributors. Now, with my FAST XFI, is figured out how to do that using “PA” (Power Adder Mode), and do it by time & RPM, instead of flipping a switch. I don’t remember the last car where I used the same timing in each gear. __________________ Ed Wright 4156 SS/JA Last edited by Ed Wright; 07-23-2020 at 06:30 PM.