Quadrajet Gasket and tuning

mat H/SA · 09-11-2012, 10:59 AM

Hello,

Im running a 350/255 combo in G/SA

I would like to know what carb gasket people use,

I currently run a open style one and want to know witch one is the best

Also, i start the run really rich and in 2nd and 3rd gear it leans a bit too much, how can i fix this

Thanks

Greg Reimer 7376 · 09-11-2012, 11:52 AM

What is your fuel pressure in 2nd and Hi gears? You can't compensate for no fuel by trying to put in too much fuel.Sounds like it could be running out of gas to me.

B Aceves · 09-11-2012, 01:05 PM

Quote:

Originally Posted by mat H/SA

Hello,

Im running a 350/255 combo in G/SA

I would like to know what carb gasket people use,

I currently run a open style one and want to know witch one is the best

Also, i start the run really rich and in 2nd and 3rd gear it leans a bit too much, how can i fix this

Thanks

Call and make a purchase from Danny Ashley !!

mat H/SA · 09-11-2012, 01:27 PM

Im running a Danny Ashley

I run 7psi, but cant see it while a do my run, will try to install my gage elsewhere.

Dave Ribeiro · 09-11-2012, 02:00 PM

Mat,

What kind of fuel pump do you run ? Yes, you need to see the fuel pressure gauge while you are making the run ... I think you will be surprised when you put the gauge on the cowl outside near windshield ... Then you can see what's happening in 2nd & thru traps ..
Sounds like lack of fuel , check it out ... Hope you are doing well ..

Give Danny a call he will help you out .................

mat H/SA · 09-11-2012, 02:53 PM

Hi Dave its been a while! i am well thanks

I run a barry grant 280 fuel pump.

and what about the gasket, is a open better than a 4 holes?

Reed Granrt · 09-11-2012, 03:43 PM

Hey Mat
Are you using a datalogger. If you are not, this is a good time to get one. That way you can monitor more than one thing and at that time install an O2 so you really know what is happening (And ya aint gotta watch fur it). Just a suggestion. Also install a couple of egt's so you know what else is a happening.
reed

FED 387 · 09-11-2012, 03:47 PM

FIRST get rid of the BG pump--second buy an Aeromotive pump like a 11203 uses less AMPs, Magna Fuel or a Weldon both great pumps too-- stay away from the Holleys too---check ALL your hose sizes make sure they are adequate for your set up place fuel pressure gauge so you can monitor whats going on during the run--then if problem persists call D.A.

gsa612 · 09-11-2012, 03:45 PM

For the gaskets your allowed two, we run the 4 hole on the bottom open on the top(worth some torque). I would test the flow on the pump it should overflow a gallon container in 30 sec. through the reg. at 7psi. If that checks ok check the sec. side of the carb, how do the plugs look after a pass. X2 on giving Danny a call. gsa612

09-11-2012, 10:59 AM	#1
mat H/SA Member Join Date: Sep 2007 Location: Shefford,Qc Can Posts: 295 Likes: 10 Liked 14 Times in 8 Posts	Quadrajet Gasket and tuning Hello, Im running a 350/255 combo in G/SA I would like to know what carb gasket people use, I currently run a open style one and want to know witch one is the best Also, i start the run really rich and in 2nd and 3rd gear it leans a bit too much, how can i fix this Thanks

09-11-2012, 11:52 AM	#2
Greg Reimer 7376 VIP Member Join Date: Nov 2008 Location: Glendora,Calif. Posts: 1,135 Likes: 172 Liked 704 Times in 218 Posts	Re: Quadrajet Gasket and tuning What is your fuel pressure in 2nd and Hi gears? You can't compensate for no fuel by trying to put in too much fuel.Sounds like it could be running out of gas to me.

09-11-2012, 01:27 PM	#4
mat H/SA Member Join Date: Sep 2007 Location: Shefford,Qc Can Posts: 295 Likes: 10 Liked 14 Times in 8 Posts	Re: Quadrajet Gasket and tuning Im running a Danny Ashley I run 7psi, but cant see it while a do my run, will try to install my gage elsewhere.

09-11-2012, 02:00 PM	#5
Dave Ribeiro VIP Member Join Date: Sep 2002 Location: Williamsburg, Va.---USA Posts: 1,827 Likes: 1,612 Liked 56 Times in 27 Posts	Re: Quadrajet Gasket and tuning Mat, What kind of fuel pump do you run ? Yes, you need to see the fuel pressure gauge while you are making the run ... I think you will be surprised when you put the gauge on the cowl outside near windshield ... Then you can see what's happening in 2nd & thru traps .. Sounds like lack of fuel , check it out ... Hope you are doing well .. Give Danny a call he will help you out ................. __________________ Dave Ribeiro 1033 STK

09-11-2012, 02:53 PM	#6
mat H/SA Member Join Date: Sep 2007 Location: Shefford,Qc Can Posts: 295 Likes: 10 Liked 14 Times in 8 Posts	Re: Quadrajet Gasket and tuning Hi Dave its been a while! i am well thanks I run a barry grant 280 fuel pump. and what about the gasket, is a open better than a 4 holes?

09-11-2012, 03:43 PM	#7
Reed Granrt Member Join Date: Jul 2011 Location: Murfreesboro, Tn Posts: 149 Likes: 0 Liked 1 Time in 1 Post	Re: Quadrajet Gasket and tuning Hey Mat Are you using a datalogger. If you are not, this is a good time to get one. That way you can monitor more than one thing and at that time install an O2 so you really know what is happening (And ya aint gotta watch fur it). Just a suggestion. Also install a couple of egt's so you know what else is a happening. reed

09-11-2012, 03:47 PM	#8
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,416 Likes: 521 Liked 330 Times in 178 Posts	Re: Quadrajet Gasket and tuning FIRST get rid of the BG pump--second buy an Aeromotive pump like a 11203 uses less AMPs, Magna Fuel or a Weldon both great pumps too-- stay away from the Holleys too---check ALL your hose sizes make sure they are adequate for your set up place fuel pressure gauge so you can monitor whats going on during the run--then if problem persists call D.A.

09-11-2012, 03:45 PM	#9
gsa612 Senior Member Join Date: Jan 2008 Location: 100th Meridian Posts: 569 Likes: 116 Liked 280 Times in 139 Posts	Re: Quadrajet Gasket and tuning For the gaskets your allowed two, we run the 4 hole on the bottom open on the top(worth some torque). I would test the flow on the pump it should overflow a gallon container in 30 sec. through the reg. at 7psi. If that checks ok check the sec. side of the carb, how do the plugs look after a pass. X2 on giving Danny a call. gsa612