Couple of questions about new 68 Camaro combo

Dave Goob Cook · 04-18-2007, 11:40 AM

Run the 750 carb, 1 5/8" headers are fine, work with the collector length.
I'd look for a camshaft that is .550" + on the lift, duration @ .050" in the high 23x range on the intake side, high 24x range on the exhaust side, with a LSA of 110-112 degrees, to help with the low compression.

3-speed automatic?
Give it 5000-5200 + stall, you might be steep on the rear gear at 4.88's, but worth a try for 1/8th mile only, but I think consistency will suffer.
If you're going to try a pukeglitch, go up on the stall some more, like 5500+.

"Despite the high cost of living, it remains popular"
Dave Cook
C375

04-18-2007, 11:40 AM	#1
Dave Goob Cook Member Join Date: Dec 2006 Location: Indy Posts: 422 Likes: 0 Liked 0 Times in 0 Posts	Run the 750 carb, 1 5/8" headers are fine, work with the collector length. I'd look for a camshaft that is .550" + on the lift, duration @ .050" in the high 23x range on the intake side, high 24x range on the exhaust side, with a LSA of 110-112 degrees, to help with the low compression. 3-speed automatic? Give it 5000-5200 + stall, you might be steep on the rear gear at 4.88's, but worth a try for 1/8th mile only, but I think consistency will suffer. If you're going to try a pukeglitch, go up on the stall some more, like 5500+. "Despite the high cost of living, it remains popular" Dave Cook C375 __________________ "Despite the high cost of living, it remains popular." Dave Cook NHRA N375