Aerospace brakes

Mitch Perkins · 05-26-2007, 11:52 PM

Front M/C outlet goes to the front brakes, port closest to the firewall goes to the rear.
I would suggest installing the Strange brakes in place of the Aerospace unit.
Strange uses a "square" oring seal on the caliper pistons that flexes back somewhat when brake pressure is released and reduces drag.
Not knocking Aerospace Components here, But as a chassis builder I have seen what systems seem to work best and most reliably.
My .02

Mitch Perkins DragCoverage.com
Staff Photographer
Perk-Bilt Race Cars

05-26-2007, 11:52 PM	#2
Mitch Perkins Junior Member Join Date: Feb 2007 Location: Wetumpka Alabama Posts: 23 Likes: 0 Liked 0 Times in 0 Posts	Front M/C outlet goes to the front brakes, port closest to the firewall goes to the rear. I would suggest installing the Strange brakes in place of the Aerospace unit. Strange uses a "square" oring seal on the caliper pistons that flexes back somewhat when brake pressure is released and reduces drag. Not knocking Aerospace Components here, But as a chassis builder I have seen what systems seem to work best and most reliably. My .02 Mitch Perkins DragCoverage.com Staff Photographer Perk-Bilt Race Cars __________________ Mitch Perkins Perk-Bilt Race Cars DragCoverage.com Staff Photographer