HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech
Register Photo Gallery FAQ Community Calendar

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-19-2007, 08:35 PM   #2
peter macritchie
Junior Member
 
Join Date: Nov 2002
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
Default

Have you tryed to put one of those coolant pressure tester pumps on the neck of the radiator where the cap twists on ?? Pump the plunger a few strokes to build a few pounds and see if it bleeds off by looking at gauge. Take off valve covers while under pressure and look for any water bubbles coming up thu the casting around springs & studs. Also drain oil & leave pan plug out while still under pressure. Block could be cracked at bottom of cylinder with coolant leaking into pan which will come out the open plug hole .Also leave spark plugs out and while under pressure possibly crank engine around and look for collant coming out any spark plug holes which will determine what cylinder may be the problem

peter macritchie is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:19 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.