Optimum Temperatures

Glenn Briglio · 12-22-2023, 05:37 PM

Quote:

Originally Posted by Frank Castros

What is the desired temperature for both Water and Oil for maximum performance? Also how many racers are using an Oil temperature gauge?

Hot and cold........... I think you can figure out which one likes what. And yes on temp gauge

SSDiv6 · 12-23-2023, 12:50 PM

There are many variables as regards to the weight of the oil in use, and synthetic vs Dinosaur oil. Synthetics have a higher tolerance to heat.

Also, the block material has to be taken into consideration. The material expansion between a cast iron block and an aluminum block is different also and it will affect the piston ring sealing.

Based on what I have observed in the dyno and discussions with others, the general temperature guidelines at the staging lanes are as follows:

Water 110° ~ 120°
Oil: 170° ~ 180°

Billy Nees · 12-23-2023, 01:09 PM

I was told by a very wise man a long time ago, "Billy you want the top of the engine freezing and the bottom melting!".

Larry L. · 12-23-2023, 09:24 PM

0W10 100% Ester base oil will perform well and won’t have to be very warm at all to it. Just my opinion.

Larry Hill · 12-25-2023, 09:03 AM

An Arkansas definition from some FE Ford folks. “ You want the top turd cold and the oil like turpentine.”

Dwight Southerland · 12-25-2023, 01:52 PM

Quote:

Originally Posted by Larry Hill

An Arkansas definition from some FE Ford folks. “ You want the top turd cold and the oil like turpentine.”

Arkansas??

Eman · 12-25-2023, 02:06 PM

Quote:

Originally Posted by SSDiv6

There are many variables as regards to the weight of the oil in use, and synthetic vs Dinosaur oil. Synthetics have a higher tolerance to heat.

Also, the block material has to be taken into consideration. The material expansion between a cast iron block and an aluminum block is different also and it will affect the piston ring sealing.

Based on what I have observed in the dyno and discussions with others, the general temperature guidelines at the staging lanes are as follows:

Water 110° ~ 120°
Oil: 170° ~ 180°

I'd like to know how to achieve those temps. If I cool the water the oil follows, no way to get oil to stay 180*

SSDiv6 · 12-25-2023, 04:39 PM

Quote:

Originally Posted by Eman

I'd like to know how to achieve those temps. If I cool the water the oil follows, no way to get oil to stay 180*

Oil pre-heater in oil pan and if you have an engine diaper, it helps too.

Larry Hill · 12-25-2023, 05:30 PM

Arkadelphia. When we first started I tried to listen to the experts, now I listen to everyone ‘cause they are going to say something that I need to know.

12-23-2023, 12:50 PM	#2
SSDiv6 VIP Member Join Date: Feb 2003 Location: Mesa, Arizona Posts: 3,048 Likes: 712 Liked 1,608 Times in 585 Posts	Re: Optimum Temperatures There are many variables as regards to the weight of the oil in use, and synthetic vs Dinosaur oil. Synthetics have a higher tolerance to heat. Also, the block material has to be taken into consideration. The material expansion between a cast iron block and an aluminum block is different also and it will affect the piston ring sealing. Based on what I have observed in the dyno and discussions with others, the general temperature guidelines at the staging lanes are as follows: Water 110° ~ 120° Oil: 170° ~ 180°

12-23-2023, 01:09 PM	#3
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,519 Likes: 3,633 Liked 7,925 Times in 1,760 Posts	Re: Optimum Temperatures I was told by a very wise man a long time ago, "Billy you want the top of the engine freezing and the bottom melting!". __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K

12-23-2023, 09:24 PM	#4
Larry L. Junior Member Join Date: Jan 2017 Posts: 18 Likes: 0 Liked 4 Times in 1 Post	Re: Optimum Temperatures 0W10 100% Ester base oil will perform well and won’t have to be very warm at all to it. Just my opinion.

12-25-2023, 09:03 AM	#5
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,685 Likes: 1,994 Liked 11,032 Times in 2,267 Posts	Re: Optimum Temperatures An Arkansas definition from some FE Ford folks. “ You want the top turd cold and the oil like turpentine.” __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

12-25-2023, 05:30 PM	#9
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,685 Likes: 1,994 Liked 11,032 Times in 2,267 Posts	Re: Optimum Temperatures Arkadelphia. When we first started I tried to listen to the experts, now I listen to everyone ‘cause they are going to say something that I need to know. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817 Last edited by Larry Hill; 12-25-2023 at 05:35 PM.