Need gears and spool for 55-62 Corvette rear

Jeff Lee · 05-02-2008, 08:44 PM

Pretty clear to me (not reading or quoting directly), your allowed a corporate type PASSENGER car rear-end. As the '62 'Vette is a non-IRS rear, it's a simple swap to a GM (non-truck) rear. To be safe, I would say that it should be from a post-1960 GM passenger cars as the stock guide (or rules) do not have allowances for vehicles pre-1960 vehicles. Don't forget, it's dictated the width of the replacement rear has to be identical to stock width.
Killer combination with any of the 327's!
Have fun..

05-02-2008, 08:44 PM	#11
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Need gears and spool for 55-62 Corvette rear Pretty clear to me (not reading or quoting directly), your allowed a corporate type PASSENGER car rear-end. As the '62 'Vette is a non-IRS rear, it's a simple swap to a GM (non-truck) rear. To be safe, I would say that it should be from a post-1960 GM passenger cars as the stock guide (or rules) do not have allowances for vehicles pre-1960 vehicles. Don't forget, it's dictated the width of the replacement rear has to be identical to stock width. Killer combination with any of the 327's! Have fun.. __________________ Jeff Lee 7494 D/S '70 AMX