Car Wiring

NHRA1926 · 11-30-2022, 05:26 PM

Try this. I installed this when I up graded to the MSD Grid system. Removes any electrical noise interference.

https://www.jegs.com/i/MSD-Ignition/...30MSD/10002/-1

Keith 944 · 11-30-2022, 06:31 PM

Quote:

Originally Posted by NHRA1926

Try this. I installed this when I up graded to the MSD Grid system. Removes any electrical noise interference.

https://www.jegs.com/i/MSD-Ignition/...30MSD/10002/-1

I don’t think that would help the interference from electrical motors to the crank trigger wires. That being said, I also use that to keep a “clean” input from the main power

Lenny5160 · 12-01-2022, 04:08 PM

I have my fan, water pump, and alternator wires bundled together and running along the intake manifold where it meets the passenger cylinder head. My throttle stop wires and crank trigger pickup are not part of the bundle, but run right along with that bundle on the same path.

I'm not going to tell you it is a recommended practice or even a good thing to do, but I have never had an issue with it (that I know of).

11-30-2022, 05:26 PM	#1
NHRA1926 Member Join Date: Dec 2015 Location: Bowling green, Ky Posts: 241 Likes: 12 Liked 232 Times in 69 Posts	Re: Car Wiring Try this. I installed this when I up graded to the MSD Grid system. Removes any electrical noise interference. https://www.jegs.com/i/MSD-Ignition/...30MSD/10002/-1

12-01-2022, 04:08 PM	#3
Lenny5160 Senior Member Join Date: Nov 2015 Location: Inver Grove Heights, MN Posts: 898 Likes: 604 Liked 431 Times in 224 Posts	Re: Car Wiring I have my fan, water pump, and alternator wires bundled together and running along the intake manifold where it meets the passenger cylinder head. My throttle stop wires and crank trigger pickup are not part of the bundle, but run right along with that bundle on the same path. I'm not going to tell you it is a recommended practice or even a good thing to do, but I have never had an issue with it (that I know of). __________________ S/ST 51 S/C 53