Fuel tank choice and size for a stocker

[BobbyH]

Am upgrading my fuel system from a stock tank in my Chevelle.Any advice appreciated.

[Larry Hill]

Just because it is a AN10 fitting on the tank outlet. Make sure the hole in the fitting is the correct ID size for what ever size the AN fitting is advertised. I had to resize mine.
If you can put your car on a set of scales and move 25 to 30 lbs around to help the balance of the car with the simulated weight of fuel and fuel cell.

I use a five gallon metal tank with foam in it.

[Kirk Morgan]

Also put weight in the drivers seat equal to your weight.

[1347]

I like the 2.5 gallon ones on Ebay, they have 2 -10 fittings, a return, and a rollover valve. you can get them with and without foam. I know the foam can come apart from certain fuel, I just feel with a -10 return on my car, the foam will de aerate the fuel.

[Mike Pearson]

If your car is close on weight use a small cell. I have a 3 gallon cell in my car and usually run 2 gallons in it. I can get real close to minimum weight with a gallon. I have a Jaz plastic cell. No foam. No sense carrying more fuel than needed.

[Tom O]

I put a Rhodes 4 gal alum. no foam cell in my 68 Chevelle earlier this year. about $175 at Summit.

[J&S Racing]

Originally Posted by BobbyH

Am upgrading my fuel system from a stock tank in my Chevelle.Any advice appreciated.

I really like the simplicity of the Aeromotive stealth set up.

[BobbyH]

Thanks for all the tips....Blessings BH

[B Parker]

Take the foam out!!! Bp