Wilwood Brake Corvette Front

dragracerray · 12-11-2021, 03:43 PM

Walt does the threaded hole for #6 go all the way through the spindle? If it does I think I would go down to a 5/8" bolt with a nut on the backside of the spindle
If the thread does not go all the way thru you may need a 3/4" "bottoming tap" to get enough threads in that short a distance. Ray

waltz · 12-12-2021, 12:05 AM

Quote:

Originally Posted by dragracerray

Walt does the threaded hole for #6 go all the way through the spindle? If it does I think I would go down to a 5/8" bolt with a nut on the backside of the spindle
If the thread does not go all the way thru you may need a 3/4" "bottoming tap" to get enough threads in that short a distance. Ray

Its a 'blind' hole. I haven't measured the hole, but looks like it is about 3/4in deep. As I might have mentioned, I'm talking to Wilwood to get a longer bolt. They have bolt 'kits' and one for the 63-64 Corvette (drum brakes) seems to have a longer bolt, just looking at the pics. That kit is about $95.00, so I'd like to be sure before pulling the trigger on that!! 3 threads is pretty sketchy even if I got it to tighten up! Monday may bring some relief.

tscheerer · 12-18-2021, 11:50 AM

Walt, do you want to sell the OEM front disc brakes off the 74 Corvette?

ken robinson · 12-18-2021, 01:32 PM

Are bolts 2 and 5 in the blue print look like there long ? Would they work if they shipped you a Qty of 2 ? ... I see they are differant after looking closer , top bolts are 11/16-16 & really hard to find hope they can help you they just overlooked that detail .

12-11-2021, 03:43 PM	#1
dragracerray Member Join Date: May 2017 Location: Webster, New York Posts: 214 Likes: 462 Liked 202 Times in 87 Posts	Re: Wilwood Brake Corvette Front Walt does the threaded hole for #6 go all the way through the spindle? If it does I think I would go down to a 5/8" bolt with a nut on the backside of the spindle If the thread does not go all the way thru you may need a 3/4" "bottoming tap" to get enough threads in that short a distance. Ray __________________ Ray Bassett I/SA 1687, SS/DA 1687 "SuperPro is both", unknown

12-18-2021, 11:50 AM	#3
tscheerer Junior Member Join Date: Feb 2007 Location: kansas city Posts: 10 Likes: 0 Liked 17 Times in 6 Posts	Re: Wilwood Brake Corvette Front Walt, do you want to sell the OEM front disc brakes off the 74 Corvette?

12-18-2021, 01:32 PM	#4
ken robinson Member Join Date: Dec 2001 Location: tomsriver nj Posts: 474 Likes: 72 Liked 213 Times in 85 Posts	Re: Wilwood Brake Corvette Front Are bolts 2 and 5 in the blue print look like there long ? Would they work if they shipped you a Qty of 2 ? ... I see they are differant after looking closer , top bolts are 11/16-16 & really hard to find hope they can help you they just overlooked that detail . Last edited by ken robinson; 12-18-2021 at 02:43 PM.