Moser engineering axles, spool, hardware

Dragsinger · 08-20-2021, 06:00 PM

I am a long-time, satisfied user of Strange Engineering products, but for this build-up on my Chevy Colorado, I am considering Moser. It is a Chevy 12 bolt, and I will need axles, spool, brakes, and other hardware.

Tell me about your experience with Moser products.

Keith 944 · 08-20-2021, 07:01 PM

I have their axles in my car since I built it in 1996 they still pay me contingency. I asked them if they wanted me to buy another set. Nope all good!!! I go 10.90@155-158 2800#s. I run almost every weekend. So the axles have thousands of runs! I would buy anything they offer. Oh yeah and they are only 35 spline too.
They also sponsor the moser shootout and used to help with special races In IHRA too.

Rory McNeil · 08-20-2021, 11:08 PM

When I started building my 85 Mustang Stocker, I went with a pair of Moser 31 spline axles, simply because I found a new pair in the local classifieds for $150., in the box. I added a Moser spool, C Clip eliminators, and a girdle cover. Also welded the tubes to the center casting. This was a 4 speed car, weighed 3090 for M, 3185 for N, ran the car in Stock for 10 years, then 3 years with a low 10 second bracket engine (still with the 4 speed), I broke a couple of ring and pinions, but never hurt the axles. Not as pretty as the Strange stuff in my other car, but the Mosers were great, especially for the price.

GTX JOHN · 08-21-2021, 12:18 AM

We run primarily Moser stuff in most of our dozen racers over
the years and have encountered Zero issues for 20+ years!

steven reynolds · 08-21-2021, 08:22 AM

I have Moser axles and spool in an 8 3/4 Mopar diff, been in there since '97, many passes, 4 ring and pinions, but the Moser stuff still perfect.

flash · 08-23-2021, 08:37 AM

Moser pays at div and nationals,strange only at nationals

Darrel Goheen · 08-23-2021, 11:28 PM

When I needed axles a couple of years ago I believe Strange said it was about a 6 week lead time. Moser sent the axles out the next day at a much lower cost!

Jeff Teuton · 08-25-2021, 05:51 PM

Good People. Fair prices. Couple of years ago I needed a center chunk for one of my drag packs. Got Larry Cummins to call them for me and picked it up in Indy. Just good people. Jeff

Rose Racing · 08-25-2021, 06:39 PM

Just bought a set of axles,Ring and Pinion and other goodies this past year and am very satisfied.

SGSST109E · 08-26-2021, 06:36 AM

Had a Mark Williams spool from my modified eliminator days. They cut the same MW spline on the Moser axles I bought in 1996. 35 spline both still in use today.

08-20-2021, 06:00 PM	#1
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,759 Likes: 5 Liked 99 Times in 60 Posts	Moser engineering axles, spool, hardware I am a long-time, satisfied user of Strange Engineering products, but for this build-up on my Chevy Colorado, I am considering Moser. It is a Chevy 12 bolt, and I will need axles, spool, brakes, and other hardware. Tell me about your experience with Moser products. __________________ Larry Woodfin 471W

08-20-2021, 07:01 PM	#2
Keith 944 VIP Member Join Date: Feb 2006 Location: Dela-where? Posts: 2,125 Likes: 1,015 Liked 1,661 Times in 526 Posts	Re: Moser engineering axles, spool, hardware I have their axles in my car since I built it in 1996 they still pay me contingency. I asked them if they wanted me to buy another set. Nope all good!!! I go 10.90@155-158 2800#s. I run almost every weekend. So the axles have thousands of runs! I would buy anything they offer. Oh yeah and they are only 35 spline too. They also sponsor the moser shootout and used to help with special races In IHRA too. __________________ KEITH MAYERS 2 X somebody many X nobody Last edited by Keith 944; 08-20-2021 at 07:03 PM. Reason: Add

08-20-2021, 11:08 PM	#3
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,258 Likes: 246 Liked 942 Times in 260 Posts	Re: Moser engineering axles, spool, hardware When I started building my 85 Mustang Stocker, I went with a pair of Moser 31 spline axles, simply because I found a new pair in the local classifieds for $150., in the box. I added a Moser spool, C Clip eliminators, and a girdle cover. Also welded the tubes to the center casting. This was a 4 speed car, weighed 3090 for M, 3185 for N, ran the car in Stock for 10 years, then 3 years with a low 10 second bracket engine (still with the 4 speed), I broke a couple of ring and pinions, but never hurt the axles. Not as pretty as the Strange stuff in my other car, but the Mosers were great, especially for the price. __________________ NHRA 6390 STK M/S 85 Mustang

08-21-2021, 12:18 AM	#4
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,545 Likes: 2,242 Liked 1,886 Times in 580 Posts	Re: Moser engineering axles, spool, hardware We run primarily Moser stuff in most of our dozen racers over the years and have encountered Zero issues for 20+ years! __________________ John Irving 741 Stock 741 Super Stock

08-21-2021, 08:22 AM	#5
steven reynolds Junior Member Join Date: Jan 2009 Location: Missouri Posts: 44 Likes: 2,298 Liked 13 Times in 11 Posts	Re: Moser engineering axles, spool, hardware I have Moser axles and spool in an 8 3/4 Mopar diff, been in there since '97, many passes, 4 ring and pinions, but the Moser stuff still perfect.

08-23-2021, 08:37 AM	#6
flash Junior Member Join Date: Apr 2012 Posts: 89 Likes: 1 Liked 6 Times in 5 Posts	Re: Moser engineering axles, spool, hardware Moser pays at div and nationals,strange only at nationals

08-23-2021, 11:28 PM	#7
Darrel Goheen Member Join Date: Jan 2011 Location: Hays, KS Posts: 379 Likes: 226 Liked 70 Times in 31 Posts	Re: Moser engineering axles, spool, hardware When I needed axles a couple of years ago I believe Strange said it was about a 6 week lead time. Moser sent the axles out the next day at a much lower cost! __________________ Darrel Goheen 785-623-7021 Stock Eliminator 585 94 Camaro Z/28 LT1/ET 585 67 Chevelle 427 Tehnician for JustAnswer.com

08-25-2021, 05:51 PM	#8
Jeff Teuton VIP Member Join Date: Jan 2002 Location: Houma, LA Posts: 2,717 Likes: 2 Liked 326 Times in 50 Posts	Re: Moser engineering axles, spool, hardware Good People. Fair prices. Couple of years ago I needed a center chunk for one of my drag packs. Got Larry Cummins to call them for me and picked it up in Indy. Just good people. Jeff __________________ Jeff Teuton 4022 STK

08-25-2021, 06:39 PM	#9
Rose Racing Member Join Date: Jan 2012 Location: Sandusky, Ohio Posts: 330 Likes: 68 Liked 152 Times in 58 Posts	Re: Moser engineering axles, spool, hardware Just bought a set of axles,Ring and Pinion and other goodies this past year and am very satisfied.

08-26-2021, 06:36 AM	#10
SGSST109E Member Join Date: Jun 2007 Location: NJ Posts: 344 Likes: 54 Liked 125 Times in 59 Posts	Re: Moser engineering axles, spool, hardware Had a Mark Williams spool from my modified eliminator days. They cut the same MW spline on the Moser axles I bought in 1996. 35 spline both still in use today.