|
05-18-2019, 01:06 PM | #41 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,435
Likes: 2,611
Liked 4,496 Times in 1,710 Posts
|
Re: AMC Stocker suggestions
Quote:
Just FWD and stock trucks are allowed .430 lift or factory, if greater. That lift difference is negligible. If you're doing good, you can get all you're allowed at the valve. Somebody might have a .400 lift cam that you could roll and see how it comes up.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
|
05-20-2019, 06:48 PM | #42 |
Member
Join Date: Sep 2011
Location: Oklahoma City, OK
Posts: 214
Likes: 3
Liked 7 Times in 5 Posts
|
Re: AMC Stocker suggestions
if they check lift at the retainer than do you calculate for lash when ordering a cam since everyone is allowed solid lifters now and roller rockers if you lash the cam at .016 would your order a .426 lift cam instead of a .410 to try to get all of it because there not worried about the cam card just lift at the retainer?
|
05-20-2019, 06:49 PM | #43 | |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,234
Likes: 3,132
Liked 6,840 Times in 1,535 Posts
|
Re: AMC Stocker suggestions
Quote:
__________________
Billy Nees 1188 STK, SS Reality, what a concept! |
|
Liked |
|
|