|
|
![]() |
#1 |
Senior Member
Join Date: Oct 2003
Posts: 566
Likes: 4,129
Liked 776 Times in 199 Posts
|
![]()
Is it a true "R" or "Q" code car? Very cool Rusty. My uncle use to tell about this car when he had the Nitro 9 car. But I never got to see it run. I saw my uncle's old Nitro 9 car at Mecum Kissimmee back in '17 and other than the lettering and a 2X4 setup it was just like it was when he raced it back in the late 70's early 80's. Good luck with the resto and I can't wait to see done.
Bret Velde 2003 ?? |
![]() |
![]() |
![]() |
#2 | |
Member
Join Date: Jan 2007
Posts: 260
Likes: 21
Liked 87 Times in 19 Posts
|
![]() Quote:
__________________
Rusty Gillis Former NHRA SS/FA and SS/GA record holder |
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jan 2007
Posts: 260
Likes: 21
Liked 87 Times in 19 Posts
|
![]()
This is the Cobrastang before it was painted.
![]() After it was painted candy blue, magenta, green, and red. ![]() I wasn't sure what color the base was under the candy. I thought it was white and when I sanded the fiberglass end cap you can see magenta, white and black. ![]() I sprayed three coats of SPI black epoxy on the deck lid. ![]() ![]()
__________________
Rusty Gillis Former NHRA SS/FA and SS/GA record holder |
![]() |
![]() |
Liked |
![]() |
#4 |
Member
Join Date: Jan 2007
Posts: 260
Likes: 21
Liked 87 Times in 19 Posts
|
![]()
I sanded the fenders down to bare metal
![]() ![]() I sprayed two coats of SPI black epoxy primer ![]() ![]()
__________________
Rusty Gillis Former NHRA SS/FA and SS/GA record holder |
![]() |
![]() |
Liked |
![]() |
#5 |
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,668
Likes: 3,844
Liked 788 Times in 336 Posts
|
![]()
Great tribute to Ken. He was a good guy. Sometimes I would see him at National events after he quit. He would be hanging around in Bob Glidden's pits.
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jan 2007
Posts: 260
Likes: 21
Liked 87 Times in 19 Posts
|
![]()
I sandblasted the front fender extension and epoxy primed
![]() ![]() I block sanded and epoxy primed again ![]() ![]() Deck lid was block sanded and epoxy primed ![]() ![]() Stone guard sandblasted and epoxy primed ![]() ![]() ![]() End caps were sanded and epoxy primed ![]() ![]()
__________________
Rusty Gillis Former NHRA SS/FA and SS/GA record holder |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Oct 2010
Location: Indiana
Posts: 830
Likes: 1,608
Liked 359 Times in 135 Posts
|
![]()
Any updates on the progress?
__________________
Who owns this car, with the peace sign,mag wheels, and four on the floor? |
![]() |
![]() |
![]() |
|
|