Magnum Heads.....will smaller LA valves fit?

magnumv8 · 01-03-2017, 07:32 PM

Eric....I had a set of the Edelbrocks done for a Magnum....2.02 down to

1.92...just made it....but I had to change the guides to 8mm since

the edelbrocks are 11/32... the main issue you will have to

discuss with NHRA is if you can change the stem size of the

valve or whether you will have to change the guide size to match

the earlier 3/8 valve stem of the LA valves....in stock they said I

had to keep the valve stem the same as OEM, superstock.. I don't

know......I would think that going from a 1.92 to a 1.88 valve

diameter might work fine since you are you only talking a .040

difference since mine was reduced by .100........the valve stem

issue comes up because the P5155469 head has an 8mm guide

diameter

D L Rambo Stk 1300

01-03-2017, 07:32 PM	#2
magnumv8 Member Join Date: Feb 2009 Location: Coraopolis, Pa. Posts: 172 Likes: 0 Liked 0 Times in 0 Posts	Re: Magnum Heads.....will smaller LA valves fit? Eric....I had a set of the Edelbrocks done for a Magnum....2.02 down to 1.92...just made it....but I had to change the guides to 8mm since the edelbrocks are 11/32... the main issue you will have to discuss with NHRA is if you can change the stem size of the valve or whether you will have to change the guide size to match the earlier 3/8 valve stem of the LA valves....in stock they said I had to keep the valve stem the same as OEM, superstock.. I don't know......I would think that going from a 1.92 to a 1.88 valve diameter might work fine since you are you only talking a .040 difference since mine was reduced by .100........the valve stem issue comes up because the P5155469 head has an 8mm guide diameter D L Rambo Stk 1300 Last edited by magnumv8; 01-03-2017 at 07:36 PM. Reason: additional info