Fuel Sample Valve location

Hotroddragpak · 07-12-2016, 01:06 PM

I'm wondering if I can run my fuel sample valve out the front of the car coming out of the grille on my Drag Pak? I saw a stocker drag Pak plumbed like this. The 2010 drag Pak has a dzus fastened hood and is a pain to remove. Any help on this matter would be greatly appreciated.

john corcoran jr · 07-12-2016, 01:31 PM

I know what you mean about the hood being a pain. I put mine in the fuel filler door pocket. I was told that as long as it is on the outlet side of the pump it was good.

Dave Gantz · 07-13-2016, 07:52 AM

Only thing is, if I'm a tech guy, how do I know where your sample valve's source is, if the hood isn't open?

Bobby DiDomenico · 07-13-2016, 08:06 AM

Quote:

Originally Posted by Dave Gantz

Only thing is, if I'm a tech guy, how do I know where your sample valve's source is, if the hood isn't open?

That is why I thought it was under the hood so they could verify the plumbing.
If in the grill location is the valve actually "outside" the car structure in the event of a wreck?

Hotroddragpak · 07-13-2016, 11:38 PM

That's what I was thinking, bit apparently it's legal for these cars. I'm just going to mount mine on the pressure regulator and remove all doubt from where the fuel came from. Just thought about mounting where it was easy to get to. The fuel door idea sounds great. They could see where the fuel is coming from being that close to the fuel source. But that's another project for later...

Jim Wahl · 07-24-2016, 07:28 PM

Quote:

Originally Posted by Dave Gantz

Only thing is, if I'm a tech guy, how do I know where your sample valve's source is, if the hood isn't open?

Great point! Jim

.

Jim Wahl · 07-24-2016, 07:31 PM

Quote:

Originally Posted by Hotroddragpak

That's what I was thinking, bit apparently it's legal for these cars. I'm just going to mount mine on the pressure regulator and remove all doubt from where the fuel came from. Just thought about mounting where it was easy to get to. The fuel door idea sounds great. They could see where the fuel is coming from being that close to the fuel source. But that's another project for later...

Never assume it's legal just because you saw it like that on somebody else's car!! Find out from your local neighborly tech guy! Jim

.

07-12-2016, 01:06 PM	#1
Hotroddragpak Junior Member Join Date: Feb 2016 Posts: 10 Likes: 0 Liked 0 Times in 0 Posts	Fuel Sample Valve location I'm wondering if I can run my fuel sample valve out the front of the car coming out of the grille on my Drag Pak? I saw a stocker drag Pak plumbed like this. The 2010 drag Pak has a dzus fastened hood and is a pain to remove. Any help on this matter would be greatly appreciated.

07-12-2016, 01:31 PM	#2
john corcoran jr Junior Member Join Date: Oct 2003 Location: darien, il Posts: 53 Likes: 0 Liked 16 Times in 10 Posts	Re: Fuel Sample Valve location I know what you mean about the hood being a pain. I put mine in the fuel filler door pocket. I was told that as long as it is on the outlet side of the pump it was good.

07-13-2016, 07:52 AM	#3
Dave Gantz Senior Member Join Date: Nov 2005 Location: Verrry South Jersey Posts: 537 Likes: 134 Liked 251 Times in 125 Posts	Re: Fuel Sample Valve location Only thing is, if I'm a tech guy, how do I know where your sample valve's source is, if the hood isn't open?

07-13-2016, 11:38 PM	#5
Hotroddragpak Junior Member Join Date: Feb 2016 Posts: 10 Likes: 0 Liked 0 Times in 0 Posts	Re: Fuel Sample Valve location That's what I was thinking, bit apparently it's legal for these cars. I'm just going to mount mine on the pressure regulator and remove all doubt from where the fuel came from. Just thought about mounting where it was easy to get to. The fuel door idea sounds great. They could see where the fuel is coming from being that close to the fuel source. But that's another project for later...