|
![]() |
#1 |
Junior Member
Join Date: Jun 2013
Posts: 13
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
what would be the max. toe in/ out acceptable on the launch landing ? we changed some front end component location and we have 1/2 in. toe out when up in the air . just seems excessive or should we have toe in ? Tyler
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Mar 2007
Posts: 2,348
Likes: 555
Liked 1,699 Times in 519 Posts
|
![]()
Actually that's not real bad. Zero would be nice but you cant always get that. try to figure out where the ride height is when you are in high gear and set the toe to about 1/8" toe in. If you have toe out on the top end it will wander back and forth. If you can buy a bump steer Kit for your car you might be able to get it closer. I got a Baer kit for my car from Summit. What kind of car is it?
__________________
Mike Pearson 2485 SS |
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Jun 2013
Posts: 13
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Mike it's a 97 Camaro
|
![]() |
![]() |
![]() |
|
|