|
|
![]() |
#1 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
![]()
__________________
Larry Woodfin 471W |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Nov 2012
Location: Md.
Posts: 107
Likes: 11
Liked 44 Times in 10 Posts
|
![]()
At 1.07 it looks like went over a hump or something in the track. Right after that the radial roll started, & got worse from there.
__________________
Tommy Baker SS/GA # 172 E/SA # 1272 |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
![]()
a number of things have been suggested and I am following up on all of them.
"If" can work out the logistics we will be at the Noble OK Lucas race with bias tires mounted. Will post updates.
__________________
Larry Woodfin 471W |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Jun 2014
Posts: 43
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
https://en.wikipedia.org/wiki/Scrub_radius
This is also something to check if your wheels are to close to neutral or in set you best have very good front end parts. This is something street rodders deal with a lot with straight axles, just replace the wheels with more offset and their fine. |
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
![]()
Big,
per super stock rules it has factory front suspension [ "A" arm style system, same system as the G body Malibu, Cutlass , Regal ] Front wheels are 4" wide and centered.
__________________
Larry Woodfin 471W |
![]() |
![]() |
![]() |
#6 |
Junior Member
Join Date: Jun 2014
Posts: 43
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
It still applies you need to imagine a line though each
ball joint to the road surface, it make no different if it's straight axles , a-arm w/ball joints or McPherson stud it still applies. |
![]() |
![]() |
![]() |
|
|