75 Nova U/SA

MikeMoller · 01-23-2015, 11:33 AM

Fabricated brackets to keep brake rod from falling out and remounting brake bias valve. Mount for fuel cell (one 4 foot piece of box tubing from Lowes cut up, welded, bolts welded in for ease of install. Fabricated mount for accelerator cable(adjustable), original from 305 did not fit. Fuels cell and pump mounted in trunk. Overflow/vent is pipe connectors from Lowes, the underside pipe has holes drilled in it, then wrapped with screen and attached with hose clamps. front frame and underside was cleaned with a pressure washer then painted with rustoleum. Front suspension had new(stock) bushings replaced in upper control arms, new calipers, rotors, brake lines. Fuel cell $25, pump $15 from craigslist.

01-23-2015, 11:33 AM	#8
MikeMoller Senior Member Join Date: May 2010 Location: Raleigh NC Posts: 637 Likes: 27 Liked 254 Times in 78 Posts	Re: 75 Nova U/SA Fabricated brackets to keep brake rod from falling out and remounting brake bias valve. Mount for fuel cell (one 4 foot piece of box tubing from Lowes cut up, welded, bolts welded in for ease of install. Fabricated mount for accelerator cable(adjustable), original from 305 did not fit. Fuels cell and pump mounted in trunk. Overflow/vent is pipe connectors from Lowes, the underside pipe has holes drilled in it, then wrapped with screen and attached with hose clamps. front frame and underside was cleaned with a pressure washer then painted with rustoleum. Front suspension had new(stock) bushings replaced in upper control arms, new calipers, rotors, brake lines. Fuel cell $25, pump $15 from craigslist. Attached Thumbnails __________________ Mike Moller NHRA 203 Q-R-T/SA Last edited by MikeMoller; 01-24-2015 at 12:00 PM.