B/SA 1969 Mustang - Page 2

Rusty Gillis · 10-21-2014, 10:39 AM

Quote:

Originally Posted by Rich67stang

Rusty,

Where did you get the stud girdle? Thanks

I bought it a long time ago but they are still available

http://www.ebay.com/itm/Ford-FE-Delu...3D261607919944

Rusty Gillis · 10-24-2014, 05:55 PM

We did not have a very good dyno session. We only got to make three good pulls before the water brake broke on the dyno. The plan was to compare the stock Cobra Jet 735 with the Quick Fuel replacement. We made the three pulls with the 735. 493 HP, 500 HP and 502 HP all around 5900.

Rusty Gillis · 10-25-2014, 08:25 AM

I forgot to mention we made 502 hp on 93 octane gas and the timing was set at 34 degrees.

4284spd · 10-26-2014, 07:37 PM

Thats around a 100hp less than the 428 engines running around now-a-days. cool to see you running again!

Rusty Gillis · 10-27-2014, 08:29 AM

Quote:

Originally Posted by 4284spd

Thats around a 100hp less than the 428 engines running around now-a-days. cool to see you running again!

Considering all the problems with the dyno and the cast iron heads and intake have never and won't be acid ported I'm happy with those numbers so far.

T-Bolt Racer · 10-27-2014, 09:34 AM

I think you can't run a girdle in nhra can't lower the oil pan?

cobrajet2 · 10-31-2014, 09:59 PM

Rusty,
I don't mean to hi-jack or anything, but have to ask a quick question. Did you ever finish that Red '67 Fairlane? Any recent pictures?

Mike

Rusty Gillis · 01-08-2015, 12:00 PM

http://www.carsandparts.com/Articles...obra-jet-build

10-24-2014, 05:55 PM	#12
Rusty Gillis Member Join Date: Jan 2007 Posts: 260 Likes: 21 Liked 87 Times in 19 Posts	Re: B/SA 1969 Mustang We did not have a very good dyno session. We only got to make three good pulls before the water brake broke on the dyno. The plan was to compare the stock Cobra Jet 735 with the Quick Fuel replacement. We made the three pulls with the 735. 493 HP, 500 HP and 502 HP all around 5900. __________________ Rusty Gillis Former NHRA SS/FA and SS/GA record holder

10-25-2014, 08:25 AM	#13
Rusty Gillis Member Join Date: Jan 2007 Posts: 260 Likes: 21 Liked 87 Times in 19 Posts	Re: B/SA 1969 Mustang I forgot to mention we made 502 hp on 93 octane gas and the timing was set at 34 degrees. __________________ Rusty Gillis Former NHRA SS/FA and SS/GA record holder

10-26-2014, 07:37 PM	#14
4284spd VIP Member Join Date: Mar 2008 Location: Longmont Colorado Posts: 1,707 Likes: 838 Liked 4,147 Times in 950 Posts	Re: B/SA 1969 Mustang Thats around a 100hp less than the 428 engines running around now-a-days. cool to see you running again! __________________ Bob Smith

10-27-2014, 09:34 AM	#16
T-Bolt Racer Junior Member Join Date: May 2013 Posts: 57 Likes: 0 Liked 0 Times in 0 Posts	Re: B/SA 1969 Mustang I think you can't run a girdle in nhra can't lower the oil pan?

10-31-2014, 09:59 PM	#17
cobrajet2 Junior Member Join Date: Feb 2009 Posts: 51 Likes: 37 Liked 11 Times in 4 Posts	Re: B/SA 1969 Mustang Rusty, I don't mean to hi-jack or anything, but have to ask a quick question. Did you ever finish that Red '67 Fairlane? Any recent pictures? Mike

01-08-2015, 12:00 PM	#18
Rusty Gillis Member Join Date: Jan 2007 Posts: 260 Likes: 21 Liked 87 Times in 19 Posts	Re: B/SA 1969 Mustang http://www.carsandparts.com/Articles...obra-jet-build __________________ Rusty Gillis Former NHRA SS/FA and SS/GA record holder