Mosel Axle Sealant

MikeMoller · 06-28-2014, 04:53 PM

I am installing Moser c-clip elim axles in a 10 bolt, they sent some aluminum RTV sealer to use. However, I can't find the same stuff anywhere. Any suggestions for a different/similar sealer I can use?

tj310 · 06-28-2014, 05:39 PM

LOL

Mosel makes a poor sealant I prefer a Chardon eh . All the silicones work similar not neccesarily the same. I usually use white tub and tile . ---Trevor

FED 387 · 06-28-2014, 05:46 PM

Any hi temp sealant will work just get something that's good for 600* or so--just put a light film on it let it skin up for about 7-10 min then assemble---you don't need tons of silicone---It's probably Valco brand silicon

MikeMoller · 06-28-2014, 10:57 PM

Quote:

Originally Posted by FED 387

Any hi temp sealant will work just get something that's good for 600* or so--just put a light film on it let it skin up for about 7-10 min then assemble---you don't need tons of silicone---It's probably Valco brand silicon

Thanks-done!

06-28-2014, 04:53 PM	#1
MikeMoller Senior Member Join Date: May 2010 Location: Raleigh NC Posts: 628 Likes: 27 Liked 243 Times in 73 Posts	Moser Axle Sealant I am installing Moser c-clip elim axles in a 10 bolt, they sent some aluminum RTV sealer to use. However, I can't find the same stuff anywhere. Any suggestions for a different/similar sealer I can use? __________________ Mike Moller NHRA 203 Q-R-T/SA Last edited by MikeMoller; 06-28-2014 at 10:58 PM. Reason: spelling

06-28-2014, 05:39 PM	#2
tj310 Member Join Date: Sep 2009 Location: Dresden On. Canada Posts: 460 Likes: 0 Liked 0 Times in 0 Posts	Re: Mosel Axle Sealant LOL Mosel makes a poor sealant I prefer a Chardon eh . All the silicones work similar not neccesarily the same. I usually use white tub and tile . ---Trevor

06-28-2014, 05:46 PM	#3
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,358 Likes: 358 Liked 282 Times in 152 Posts	Re: Moser Axle Sealant Any hi temp sealant will work just get something that's good for 600* or so--just put a light film on it let it skin up for about 7-10 min then assemble---you don't need tons of silicone---It's probably Valco brand silicon