68 - 72 Nova SS GT manual trans combinations

[Geerhead55]

Remember,, if you're building a Nova for Superstock,, with a good intake and some sort of spacer, you could have a clearance issue as there were no cowl hoods offered on them. We've got a racer out here facing the same issue with his Nova project. My 2 cents.
Danny Durham

[Alan Nyhus]

Don't overlook the '68 327-325 motor in the Nova (manual trans non-GT combo). -Al

[James Hill]

305 w/ 5spd would be a killer

[MAURICE BLENDHEIM]

Originally Posted by Geerhead55

Remember,, if you're building a Nova for Superstock,, with a good intake and some sort of spacer, you could have a clearance issue as there were no cowl hoods offered on them. We've got a racer out here facing the same issue with his Nova project. My 2 cents.
Danny Durham

Danny…Define "good intake and some sort of spacer"? MB.

[Geerhead55]

Originally Posted by MAURICE BLENDHEIM

Danny…Define "good intake and some sort of spacer"? MB.

Still looking for the right pieces at this time,, probably settling for a 1 inch spacer. Cylinder heads will dictate intake choice, but for right now the Brodix that was on the shelf won't allow the hood to close,,, an older Holley Strip Dominator we borrowed did have clearance. Nothing has happened on the car in over a year, right now.
Danny Durham

[Pvt Parts]

Originally Posted by Geerhead55

Remember,, if you're building a Nova for Superstock,, with a good intake and some sort of spacer, you could have a clearance issue as there were no cowl hoods offered on them. We've got a racer out here facing the same issue with his Nova project. My 2 cents.
Danny Durham

There's a cure for that.

[Geerhead55]

Originally Posted by Pvt Parts

There's a cure for that.

I'm listening, Scott.
Danny Durham