40 spline spool

Dave Tincher · 01-25-2014, 08:35 PM

Are mark Williams and strange 40 spline the same?

Alan Roehrich · 01-25-2014, 09:32 PM

Mark Williams was using a different pressure angle at one point. I think any of the "big three" can produce an axle splined for the spools of their competitors.

Paul Hellenberg · 01-25-2014, 10:26 PM

Quote:

Originally Posted by Alan Roehrich

Mark Williams was using a different pressure angle at one point. I think any of the "big three" can produce an axle splined for the spools of their competitors.

Alan is precisely correct.

Alan Roehrich · 01-25-2014, 10:46 PM

Quote:

Originally Posted by Paul Hellenberg

Alan is precisely correct.

Paul, I'm married, so that simply cannot be true!

Ed Wright · 01-25-2014, 10:58 PM

Quote:

Originally Posted by Alan Roehrich

Paul, I'm married, so that simply cannot be true!

How true. LOL

Dave Tincher · 01-25-2014, 11:54 PM

Thanks

Jack Zimmerman · 01-26-2014, 10:01 AM

To the best of my knowledge, the pressure angle on 40 spline axles is the same from all race axle manufacturers (45 degrees).

Adger Smith · 01-26-2014, 12:46 PM

OK, why do these guys only have one 40 spline spool that will fit Summers, Strange, Moser and MW axles??
1.http://www.precisiongear.com/
2.http://www.moserengineering.com/
3.http://www.summersbrothersracing.com/spools.htm
I think you guys are getting the 40 spline and 35 spline pressure angles mixed up.
I have mix and match rear ends in my Roadster and Super Stock Camaro.
The Camaro has Gun drilled MW 40 and the Roadster has Gun Drilled Strange 40.
I have 4 rearends that have 2 strange, 1 moser and 1 MW 40 spline spool.
I can put any of the rearends in either Roadster or Camaro.
I happen to have been working on both of them today and have both of them apart. I can provide pictures.

Jack Zimmerman · 01-26-2014, 02:14 PM

Adger: Isn't that what I said?

Adger Smith · 01-26-2014, 05:48 PM

I think I've got your back, Jack.. :~)

01-25-2014, 08:35 PM	#1
Dave Tincher Member Join Date: Oct 2004 Location: Elizabethtown IN Posts: 118 Likes: 1 Liked 1 Time in 1 Post	40 spline spool Are mark Williams and strange 40 spline the same? __________________ Dave Tincher 306 SS

01-25-2014, 09:32 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,105 Likes: 1,564 Liked 1,789 Times in 408 Posts	Re: 40 spline spool Mark Williams was using a different pressure angle at one point. I think any of the "big three" can produce an axle splined for the spools of their competitors. __________________ Alan Roehrich 212A G/S

01-25-2014, 11:54 PM	#6
Dave Tincher Member Join Date: Oct 2004 Location: Elizabethtown IN Posts: 118 Likes: 1 Liked 1 Time in 1 Post	Re: 40 spline spool Thanks __________________ Dave Tincher 306 SS

01-26-2014, 10:01 AM	#7
Jack Zimmerman Junior Member Join Date: Dec 2001 Location: Clemmons, NC Posts: 35 Likes: 0 Liked 11 Times in 6 Posts	Re: 40 spline spool To the best of my knowledge, the pressure angle on 40 spline axles is the same from all race axle manufacturers (45 degrees).

01-26-2014, 12:46 PM	#8
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: 40 spline spool OK, why do these guys only have one 40 spline spool that will fit Summers, Strange, Moser and MW axles?? 1.http://www.precisiongear.com/ 2.http://www.moserengineering.com/ 3.http://www.summersbrothersracing.com/spools.htm I think you guys are getting the 40 spline and 35 spline pressure angles mixed up. I have mix and match rear ends in my Roadster and Super Stock Camaro. The Camaro has Gun drilled MW 40 and the Roadster has Gun Drilled Strange 40. I have 4 rearends that have 2 strange, 1 moser and 1 MW 40 spline spool. I can put any of the rearends in either Roadster or Camaro. I happen to have been working on both of them today and have both of them apart. I can provide pictures. __________________ Adger Smith (Former SS) Last edited by Adger Smith; 01-26-2014 at 12:59 PM. Reason: sp & sharp comment

01-26-2014, 02:14 PM	#9
Jack Zimmerman Junior Member Join Date: Dec 2001 Location: Clemmons, NC Posts: 35 Likes: 0 Liked 11 Times in 6 Posts	Re: 40 spline spool Adger: Isn't that what I said?

01-26-2014, 05:48 PM	#10
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: 40 spline spool I think I've got your back, Jack.. :~) __________________ Adger Smith (Former SS)