MSD crank trigger air gap????

art leong · 08-24-2007, 09:55 PM

What should the air gap be on a MSD crank trigger?

Oldtimer · 08-25-2007, 12:16 AM

Art, .050 if my mind dont pop out of gear seems to be the # I remember.

Kevin Love · 08-25-2007, 12:23 PM

MSD recommends a minimum of .050 and states that up to .080 is ok

Steven W Johnson · 08-28-2007, 11:43 AM

Quote:

Originally Posted by Rick Bailey

Another method..............turn the sensor in untill it touches the ring, then turn it out one complete turn. This will give you your .050.

This is also the proceedure for crank/rpm sensors on semi's that are blind.

Rick

Better watch that one as some (mine) balancers want to jump around more than a few thousands! Watch for scratch marks on the ring! If so back off gap.
MY 02

08-24-2007, 09:55 PM	#1
art leong VIP Member Join Date: Dec 2001 Location: Richmond Hill, Georgia Posts: 2,003 Likes: 0 Liked 1 Time in 1 Post	MSD crank trigger air gap???? What should the air gap be on a MSD crank trigger?

08-25-2007, 12:16 AM	#2
Oldtimer Junior Member Join Date: Jul 2002 Location: Arkansas Posts: 87 Likes: 0 Liked 0 Times in 0 Posts	Re: MSD crank trigger air gap???? Art, .050 if my mind dont pop out of gear seems to be the # I remember. __________________ Bob Pagano L88BOB@aol.com www.dyainc.org 4033 AA/SA

08-25-2007, 12:23 PM	#3
Kevin Love Member Join Date: Jan 2002 Location: canada Posts: 111 Likes: 3 Liked 18 Times in 9 Posts	Re: MSD crank trigger air gap???? MSD recommends a minimum of .050 and states that up to .080 is ok __________________ Kevin Love 5666 STK/SS