Moroso 47140's Camaro springs...

brent flynn · 12-22-2012, 09:28 PM

Any of you '67-'68 Camaro small block guys running these? Or are these not the lightest SBC spring that moroso makes? THanks and Merry Christmas to all!!

Monte Howard · 12-22-2012, 09:43 PM

Brent, I use the 47150 it is a lighter spring then the 47140 and I have to cut 1 coil off.
Your motor is heavier then my 350, so I bet you will have to try the 47150 first without cutting anything off and see were it sets. If it sets to low you will have to go with the 47140.
If it sets a little to high at first don't worry it will settle a inch or so.

brent flynn · 12-22-2012, 10:01 PM

Quote:

Originally Posted by Monte Howard

Brent, I use the 47150 it is a lighter spring then the 47140 and I have to cut 1 coil off.
Your motor is heavier then my 350, so I bet you will have to try the 47150 first without cutting anything off and see were it sets. If it sets to low you will have to go with the 47140.

We had the the 47150's(im pretty sure) in my Brother's 66GTO...we cut around a coil... i just wasnt sure that i was lookin at the right ones...because it said 47150's fit the 57 Chevs(on line) ... Bryan Phillips told me to go with the lightest SBC springs and most likely have to trim. Thanks Monte... i appreciate the reply... how bout's those 4.88's? Im thinkin i will want to try them, since my trans doesnt have the 2.75 gearset... I have 4.56s to start with... I want this thing to leave!! hehe... I will get my spare ATI 8'' restalled, as well... its only about 4200ish right now... im probably lookin for 5000ish...wouldnt you think?

cad · 12-23-2012, 11:38 AM

I have the 47150 springs and did cut a coil off.
With an aluminum headed small block.

Clark

brent flynn · 12-23-2012, 03:03 PM

Quote:

Originally Posted by cad

I have the 47150 springs and did cut a coil off.
With an aluminum headed small block.

Clark

THanks!

12-22-2012, 09:28 PM	#1
brent flynn Senior Member Join Date: Apr 2011 Location: Middletown, IN Posts: 593 Likes: 0 Liked 0 Times in 0 Posts	Moroso 47140's Camaro springs... Any of you '67-'68 Camaro small block guys running these? Or are these not the lightest SBC spring that moroso makes? THanks and Merry Christmas to all!! __________________ 1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440 Workin' on E/SA combo 3119 E/SA

12-22-2012, 09:43 PM	#2
Monte Howard Member Join Date: Nov 2002 Location: Potomac,IL Posts: 279 Likes: 1 Liked 71 Times in 23 Posts	Re: Moroso 47140's Camaro springs... Brent, I use the 47150 it is a lighter spring then the 47140 and I have to cut 1 coil off. Your motor is heavier then my 350, so I bet you will have to try the 47150 first without cutting anything off and see were it sets. If it sets to low you will have to go with the 47140. If it sets a little to high at first don't worry it will settle a inch or so. __________________ Monte Howard 3209 STK, 3208 SS Last edited by Monte Howard; 12-22-2012 at 09:58 PM.

12-23-2012, 11:38 AM	#4
cad Senior Member Join Date: Apr 2009 Location: Omaha, NE Posts: 702 Likes: 202 Liked 91 Times in 51 Posts	Re: Moroso 47140's Camaro springs... I have the 47150 springs and did cut a coil off. With an aluminum headed small block. Clark