Shubeck style lifters

jmcarter · 10-04-2012, 12:02 PM

Quote:

Originally Posted by Tom Moock

Greg, Cliff Sherman makes tool steel lifters that are shimmed up to allow .012 in. of plunge. Tom

Cliff Sherman's contact info???

Jeff Lee · 10-04-2012, 01:02 PM

Tool steel lifters set up for NHRA / IHRA are available here:
http://www.precisionenginetech.com/p...solid-lifters/

njk53 · 10-04-2012, 01:31 PM

Are these lifters legal with a hydraulic camshaft, like the Schubecks? Their webpage says solid lifter.

Jeff Lee · 10-04-2012, 03:47 PM

My boo-boo. The previous response was for a industry newsletter.
Here is Trend. They don't show it but I called to confirm the offer a .012" "cheater" hydraulic lifter which satisfies NHRA / IHRA requirements.
Price for a set of 16 .904" Chrysler quoted was $610 with a micro-polish finish, $661 with an EDM oil feed at the foot or $1,285 for their coated body (EDM not available on coated as the coating would flake off). These are street prices.
http://www.trendperform.com/index.ph...ts&type=lifter

Also see Precision Products Performance - PPP as they also offer tool steel lifters that will work. Or contact Sherman.

10-04-2012, 01:02 PM	#2
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Shubeck style lifters Tool steel lifters set up for NHRA / IHRA are available here: http://www.precisionenginetech.com/p...solid-lifters/ __________________ Jeff Lee 7494 D/S '70 AMX

10-04-2012, 01:31 PM	#3
njk53 Senior Member Join Date: Jul 2007 Location: East China, MI Posts: 504 Likes: 0 Liked 0 Times in 0 Posts	Re: Shubeck style lifters Are these lifters legal with a hydraulic camshaft, like the Schubecks? Their webpage says solid lifter. __________________ Nelson Kowal Stock 345

10-04-2012, 03:47 PM	#4
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Shubeck style lifters My boo-boo. The previous response was for a industry newsletter. Here is Trend. They don't show it but I called to confirm the offer a .012" "cheater" hydraulic lifter which satisfies NHRA / IHRA requirements. Price for a set of 16 .904" Chrysler quoted was $610 with a micro-polish finish, $661 with an EDM oil feed at the foot or $1,285 for their coated body (EDM not available on coated as the coating would flake off). These are street prices. http://www.trendperform.com/index.ph...ts&type=lifter Also see Precision Products Performance - PPP as they also offer tool steel lifters that will work. Or contact Sherman. __________________ Jeff Lee 7494 D/S '70 AMX Last edited by Jeff Lee; 10-04-2012 at 03:57 PM.