Parts for sale off 399ci Aussie Super Stock Max effort SBC

PROGXP · 08-26-2012, 10:28 PM

Parts for sale off 399ci Australian Super Stock Max effort Small Block Chev.

Parts for sale off 399ci Australian Super Stock Max effort Small Block Chev. Suitable for Australian Pro Stock, ANDRA / NHRA Competition Eliminator, Super Stock or big cubic inch N/A Outlaw

• CFE SBX-A Cylinder heads CNC ported by TRE for 4.400 bore space. Cyl #4 has had a small repair due to some peppering. Repair will be OK in service. (see photos.) Jesel Rocker gear (plus spares) with tool steel adjusters, PSI springs, Titanium valves, Titanium Retainers and coated Titanium Locks. 4 corner cooling or plugs for front only cooling. TRE Billet Runner intake manifold with adjustable plenum volume and Star Vacuum Relief Valve fitted to valley cover. Carb linkages on manifold to suit carbs below. $9500

• 2 x Dominator carbs updated by Bob Book with Braswell components for ERC fuel (no jets).Magnafuel 4-port regulator with insulated Speedflow lightweight hoses. $3500

• Billet Shear plates x 2 to suit carbs and manifold. $250

• Jesel Bronze insert pushrods x 16 (Can be shortened to suit new length.) $500

• Jesel Keyway roller lifters x 16. $500

• 3.570” Stroke Crower Lightweight REM polished Crankshaft. Large Journal mains, Honda big end. $1750 (picture to come)

• This package went 7.44 @ 182.97 in Haas GXP at 6lb/ci (399ci and 2400Lb) with 3spd auto (no -250Lb in Aus for the auto) at 1.03 correction factor. All parts are in good condition with dyno time and a total of 46 passes on them. Going in a different direction now and need to move them on.

• I will provide all fund transfer details and ship as soon as payment is received. If you buy the lot, all parts will be boxed and wrapped on a pallet for delivery. Photos of all parts available on request.

For all photos go to http://s1240.photobucket.com/albums/gg490/PROGXP/ and check them out.

Darren Parker
Darrenp@socobell.com.au

08-26-2012, 10:28 PM	#1
PROGXP Junior Member Join Date: Apr 2010 Posts: 2 Likes: 0 Liked 0 Times in 0 Posts	Parts for sale off 399ci Aussie Super Stock Max effort SBC Parts for sale off 399ci Australian Super Stock Max effort Small Block Chev. Parts for sale off 399ci Australian Super Stock Max effort Small Block Chev. Suitable for Australian Pro Stock, ANDRA / NHRA Competition Eliminator, Super Stock or big cubic inch N/A Outlaw • CFE SBX-A Cylinder heads CNC ported by TRE for 4.400 bore space. Cyl #4 has had a small repair due to some peppering. Repair will be OK in service. (see photos.) Jesel Rocker gear (plus spares) with tool steel adjusters, PSI springs, Titanium valves, Titanium Retainers and coated Titanium Locks. 4 corner cooling or plugs for front only cooling. TRE Billet Runner intake manifold with adjustable plenum volume and Star Vacuum Relief Valve fitted to valley cover. Carb linkages on manifold to suit carbs below. $9500 • 2 x Dominator carbs updated by Bob Book with Braswell components for ERC fuel (no jets).Magnafuel 4-port regulator with insulated Speedflow lightweight hoses. $3500 • Billet Shear plates x 2 to suit carbs and manifold. $250 • Jesel Bronze insert pushrods x 16 (Can be shortened to suit new length.) $500 • Jesel Keyway roller lifters x 16. $500 • 3.570” Stroke Crower Lightweight REM polished Crankshaft. Large Journal mains, Honda big end. $1750 (picture to come) • This package went 7.44 @ 182.97 in Haas GXP at 6lb/ci (399ci and 2400Lb) with 3spd auto (no -250Lb in Aus for the auto) at 1.03 correction factor. All parts are in good condition with dyno time and a total of 46 passes on them. Going in a different direction now and need to move them on. • I will provide all fund transfer details and ship as soon as payment is received. If you buy the lot, all parts will be boxed and wrapped on a pallet for delivery. Photos of all parts available on request. For all photos go to http://s1240.photobucket.com/albums/gg490/PROGXP/ and check them out. Darren Parker Darrenp@socobell.com.au