Bellhousing Breakage

Run to Rund · 08-06-2012, 01:11 PM

Manual trans guys are used to checking bell housing alignment and installing offset dowels. I just wonder how much is the bell and how much is the placement of the dowels in the block. I don't know if you can use an empty T350 case and check its alignment to the crank centerline, but I'd try something to verify it.

Also, you might look into motor mounts with restricted flex (or steel mounts) with the stock type trans mount.

08-06-2012, 01:11 PM	#1
Run to Rund Senior Member Join Date: Sep 2007 Location: Henderson, NV Posts: 583 Likes: 8 Liked 54 Times in 27 Posts	Re: Bellhousing Breakage Manual trans guys are used to checking bell housing alignment and installing offset dowels. I just wonder how much is the bell and how much is the placement of the dowels in the block. I don't know if you can use an empty T350 case and check its alignment to the crank centerline, but I'd try something to verify it. Also, you might look into motor mounts with restricted flex (or steel mounts) with the stock type trans mount.