68 Camaro switch panel question

Dana Fitzpatrick · 05-16-2012, 07:17 PM

I'm looking for a switch panel that fits the hole in the factory center trim panel where the heater controls were installed. Does anyone know one that works reasonably well? Thanks for any help.

Mark Ruset · 05-16-2012, 10:49 PM

Dana I fabricated my own switch panel for my 68 Camaro. I used a piece of aluminum stock and mounted it where the radio was installed, I used a nut and bolt with a large fender washer, it was secured through the hole for the on-off knob and the tunning knob. It is very simple and very neat.

mwudel · 05-17-2012, 03:05 PM

So you don't have to have the factory pannel in there with the heater controls or is this not a stock/SS car?

richie 2 · 05-17-2012, 08:32 PM

we ran the ARC (autorod.net) #3100 right in '67 camaro heater control panel. worked/fit/looked great...nice piece and racer friendly.

05-16-2012, 07:17 PM	#1
Dana Fitzpatrick Member Join Date: May 2009 Posts: 148 Likes: 4 Liked 10 Times in 6 Posts	68 Camaro switch panel question I'm looking for a switch panel that fits the hole in the factory center trim panel where the heater controls were installed. Does anyone know one that works reasonably well? Thanks for any help.

05-16-2012, 10:49 PM	#2
Mark Ruset Member Join Date: May 2006 Location: Southwest Florida Posts: 250 Likes: 23 Liked 34 Times in 24 Posts	Re: 68 Camaro switch panel question Dana I fabricated my own switch panel for my 68 Camaro. I used a piece of aluminum stock and mounted it where the radio was installed, I used a nut and bolt with a large fender washer, it was secured through the hole for the on-off knob and the tunning knob. It is very simple and very neat. __________________ Mark Ruset 2048 STK

05-17-2012, 08:32 PM	#4
richie 2 Senior Member Join Date: Feb 2009 Posts: 924 Likes: 328 Liked 160 Times in 74 Posts	Re: 68 Camaro switch panel question we ran the ARC (autorod.net) #3100 right in '67 camaro heater control panel. worked/fit/looked great...nice piece and racer friendly.

05-17-2012, 03:05 PM	#3
mwudel Junior Member Join Date: Oct 2007 Posts: 10 Likes: 0 Liked 0 Times in 0 Posts	Re: 68 Camaro switch panel question So you don't have to have the factory pannel in there with the heater controls or is this not a stock/SS car?