12 bolt yoke

tj310 · 05-01-2012, 08:00 AM

We put ours on the tranny slip yoke , works fine. ---Trevor

Dion Hildebrandt · 05-01-2012, 09:28 AM

When I had asked computech about the output shaft sensor location they said it could be done but wasnt reccommended as the slip joint does just that, slipping in and out. the movement may be minimal but could cause some issues with the sensors picking up the signal. fwiw.

tj310 · 05-01-2012, 01:03 PM

Our's is a F body torque arm solidly mounted so there is virtualy no movement. --- Trevor

05-01-2012, 08:00 AM	#1
tj310 Member Join Date: Sep 2009 Location: Dresden On. Canada Posts: 460 Likes: 0 Liked 0 Times in 0 Posts	Re: 12 bolt yoke We put ours on the tranny slip yoke , works fine. ---Trevor

05-01-2012, 09:28 AM	#2
Dion Hildebrandt Member Join Date: Nov 2008 Location: calgary alberta canada Posts: 383 Likes: 0 Liked 0 Times in 0 Posts	Re: 12 bolt yoke When I had asked computech about the output shaft sensor location they said it could be done but wasnt reccommended as the slip joint does just that, slipping in and out. the movement may be minimal but could cause some issues with the sensors picking up the signal. fwiw. __________________ Dion Hildebrandt 6009 STK H/SA

05-01-2012, 01:03 PM	#3
tj310 Member Join Date: Sep 2009 Location: Dresden On. Canada Posts: 460 Likes: 0 Liked 0 Times in 0 Posts	Re: 12 bolt yoke Our's is a F body torque arm solidly mounted so there is virtualy no movement. --- Trevor