Front springs

1320racer · 03-05-2012, 10:13 PM

you ain't been on the bumper yet

and I used Moog springs on my stock suspension Chevelle...

That said, who makes the spring isn't important, what is important is that you use the tallest spring that will fit with a wire diameter heavy enough to the support the nose weight within 10%, that when compressed at ride height results in a air gap of no more than 1" between the factory snubber on the lower control arm and it's point of contact on the frame

03-05-2012, 10:13 PM	#5
1320racer VIP Member Join Date: Nov 2007 Location: New Jersey Posts: 2,628 Likes: 160 Liked 759 Times in 379 Posts	Re: Front springs you ain't been on the bumper yet and I used Moog springs on my stock suspension Chevelle... That said, who makes the spring isn't important, what is important is that you use the tallest spring that will fit with a wire diameter heavy enough to the support the nose weight within 10%, that when compressed at ride height results in a air gap of no more than 1" between the factory snubber on the lower control arm and it's point of contact on the frame Last edited by 1320racer; 03-05-2012 at 10:18 PM.