|
12-24-2006, 01:44 PM | #1 |
Senior Member
Join Date: Aug 2006
Location: Pukwana SD
Posts: 858
Likes: 555
Liked 97 Times in 47 Posts
|
stock super stock parts
2.18 low p/g 25 runs since freshend 650.00 4/7 swap roller for 396 ss 250.0 402-375 complete motor with 291 heads steel crank crower rods cp pistons subeck liter bored true decked and boredcomp cam big pan new oil pump .Never started 8500.0 or offer Also new set of 401 heads done at calverts. Ready to bolt on 3500.0 new intake also 300.0 Set of cower roller lifters s/b dyno time 250.0 set 1.6 used crne comp roller rockers 100.0 18* 4 barrel intake 200.0 s/b. 780 prc carb 450.00 Jessel rockers for s/b ford 1.8 1.6 missing 1 intake 500.0 Like new. stefs aluim pan for 289, 200.00 8 tci convertor for c4 6200 used 1 season 259.00.Every thing is open to offers as this stuff needs to go. Jim Hanig.
|
12-24-2006, 04:22 PM | #2 |
Member
Join Date: Jul 2006
Location: san dimas , calif
Posts: 128
Likes: 0
Liked 4 Times in 3 Posts
|
Jim, please fill me in on whats been done to the 401 heads you have anything funny or are they factory? very interested but why havent they ever been used ,and are they a 2.19-1.88 valve head. who is calvert dont know this guy can I talk to him also?e-mail me dahkahuna@aol.com
|
12-24-2006, 04:27 PM | #3 |
Member
Join Date: Jul 2006
Location: san dimas , calif
Posts: 128
Likes: 0
Liked 4 Times in 3 Posts
|
fill me in on what valves , springs, rertainer, keepers, seals, stud, guide plates, etc are with the heads. dahkahuna@aol.com
|
12-24-2006, 06:40 PM | #4 |
Junior Member
Join Date: Mar 2003
Location: Geismar, LA
Posts: 50
Likes: 0
Liked 0 Times in 0 Posts
|
Interested in the transmission. Please send me more information about it(straight cut gears, transbrake, built by, internals) to Stk4405@aol.com or call 225-268-4044
|
12-24-2006, 06:56 PM | #5 |
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,399
Likes: 494
Liked 724 Times in 280 Posts
|
Wayne Calvert Precision Engs. (940) 382-6815. 220 Dallas Dr, Denton, TX
He is used by some very well know racers, with good results. Jim, Give me some info on : 18* 4 barrel intake 200.0 adgersperf@aol.com 903-794-7223 shop Adger Smith
__________________
Adger Smith (Former SS) |
12-25-2006, 12:02 AM | #6 |
Junior Member
Join Date: Dec 2006
Location: n.j.
Posts: 55
Likes: 0
Liked 0 Times in 0 Posts
|
intristed in the 289 pan .is it front sump ?
|
12-25-2006, 04:43 PM | #7 |
Senior Member
Join Date: Aug 2006
Location: Pukwana SD
Posts: 858
Likes: 555
Liked 97 Times in 47 Posts
|
Joe, yes it is . has had some damage but still a good pan. Jim
|
12-25-2006, 04:48 PM | #8 |
Senior Member
Join Date: Aug 2006
Location: Pukwana SD
Posts: 858
Likes: 555
Liked 97 Times in 47 Posts
|
4405, trans was built by Jimmy Aribe,few years ago gear set is tci dont know if its straight cut i hard rutland look it this summer. Then put in the an made 20 or so runs and it has a brake.
|
12-25-2006, 04:53 PM | #9 |
Senior Member
Join Date: Aug 2006
Location: Pukwana SD
Posts: 858
Likes: 555
Liked 97 Times in 47 Posts
|
dahkuna far as i know nothing funny?? has been done to the heads they have manley vales kmotion springs and rets ,no studs or guide plates.AS to why they where no used , sold the car. j hanig
|
12-25-2006, 06:08 PM | #10 |
Junior Member
Join Date: Dec 2006
Location: n.j.
Posts: 55
Likes: 0
Liked 0 Times in 0 Posts
|
WHAT KIND OF DAMAGE? CAN U EMAIL PHOTO?
|
|
|