565 for Fast Brackets Fresh off Dyno this week!

TheGoodBadGuy · 12-31-2006, 08:23 PM

Now THIS is a GREAT deal.

565 Bow Tie block, splayed billet mains, Oliver rods, Stealth Callies 4.25 crank, Weisco pistons, Akerly Childs Hellfire rings, O-Ringed, Forcelle and Clark copper gaskets, Dart 360's w/all new Manley valves, springs keepers and retainers as well as a first class valve job, T&D rockers, Jesel Belt Drive, Moroso Vacuum pump, Aluminum sheetmetal covers w/ billet rails, Dart intake, MSD distributor w/crank trigger, ATI balancer. Full Comp Cams Roller Cam with Brand New Rollers. Steve Taylor Dominator, Taylor wires......on and on the list goes.

This engine was built about five years ago at a cost apoaching 20k. It ran 9.00 @ 151 in a 3400 lb foot brake Camaro w/10 tires a couple of times, after that it sat.It had less than 20 passes on it before we freshened it. We just freshened it in house. Anybody who knows me knows I don't cut corners. If there was any question at all, it was replaced. It really didn't need too much, now all it needs is a car to put it in. The dyno shows the engine has incredible torque and horsepower numbers. We stopped pulling it at 7100 but it was still climbing and we had a very safe tune in it.

A perfect engine for fast bracket Dragster or Doorslammer.Bolt it in and forget about it

This engine is built Nitrous Safe (It has never been sprayed or abused)and there is brand new NX 700 hp system set up for use with this engine. That means you can safely have the horsepower and torque of a 30-40 or 50,000.00 dollar engine.

Top Dragster
Top Sportsman
Fast Super Gas

The dyno sheets are available to serious inquirys

Buy it now for 9500.00 before I change my mind.

Happy New Year!

Adam Landolfi
732 995 2070

Adam Landolfi
www.LandysPerformance
732 462 0911

6682Bktrcr · 01-01-2007, 09:49 PM

are they aluminum rods how much hp about.Thanks Louie

Louie

TheGoodBadGuy · 01-01-2007, 10:06 PM

Hi,

Oliver Steel Rods....the best money can buy as far as I know.

The engine made 877 @ 7100. I usually pull it to 7600, it has made 920. The dyno guy was timid because I wasn't there, better safe I guess.

It also make insane torque that is more like a telephone pole than a curve, peak was 745 but it had 730 @ 4600 and 690 @6500

That will get it done.

It's been 9.00 151 off the foot brake on real 10" tires in a camaro.

It's all fresh right now, we dynoed it last week.

There is no better engine at a price even close to this.

Adam
732 995 2070

Adam Landolfi
www.LandysPerformance
732 462 0911

TheGoodBadGuy · 01-01-2007, 10:08 PM

oh yea, that camaro weighed 3450

Adam Landolfi
www.LandysPerformance
732 462 0911

TheGoodBadGuy · 01-03-2007, 09:10 PM

The deal fell through....what else is new....anyway, it's still available.

I may put it back on the dyno with the right headers and swing it to 7600. I wonder if it will sell if it makes 920.

Adam

Adam Landolfi
www.LandysPerformance
732 462 0911

TheGoodBadGuy · 01-08-2007, 10:40 PM

It's hard to believe that an engine like this won't sell. It makes me feel old.

Well, I gave it away today to a kid who hangs around the shop.

Now I feel better. But, not any younger.

Adam Landolfi
www.LandysPerformance
732 462 0911

12-31-2006, 08:23 PM	#1
TheGoodBadGuy Junior Member Join Date: Dec 2002 Location: USA Posts: 47 Likes: 0 Liked 0 Times in 0 Posts	565 for Fast Brackets Fresh off Dyno this week! Now THIS is a GREAT deal. 565 Bow Tie block, splayed billet mains, Oliver rods, Stealth Callies 4.25 crank, Weisco pistons, Akerly Childs Hellfire rings, O-Ringed, Forcelle and Clark copper gaskets, Dart 360's w/all new Manley valves, springs keepers and retainers as well as a first class valve job, T&D rockers, Jesel Belt Drive, Moroso Vacuum pump, Aluminum sheetmetal covers w/ billet rails, Dart intake, MSD distributor w/crank trigger, ATI balancer. Full Comp Cams Roller Cam with Brand New Rollers. Steve Taylor Dominator, Taylor wires......on and on the list goes. This engine was built about five years ago at a cost apoaching 20k. It ran 9.00 @ 151 in a 3400 lb foot brake Camaro w/10 tires a couple of times, after that it sat.It had less than 20 passes on it before we freshened it. We just freshened it in house. Anybody who knows me knows I don't cut corners. If there was any question at all, it was replaced. It really didn't need too much, now all it needs is a car to put it in. The dyno shows the engine has incredible torque and horsepower numbers. We stopped pulling it at 7100 but it was still climbing and we had a very safe tune in it. A perfect engine for fast bracket Dragster or Doorslammer.Bolt it in and forget about it This engine is built Nitrous Safe (It has never been sprayed or abused)and there is brand new NX 700 hp system set up for use with this engine. That means you can safely have the horsepower and torque of a 30-40 or 50,000.00 dollar engine. Top Dragster Top Sportsman Fast Super Gas The dyno sheets are available to serious inquirys Buy it now for 9500.00 before I change my mind. Happy New Year! Adam Landolfi 732 995 2070 Adam Landolfi www.LandysPerformance 732 462 0911 __________________ www.LandysPerformance.com. Established in 1968 by \"Coney Island Ralph\" Landolfi, my Dad, we have the experience and the compassion to help any racer with any questions. Drag Racing is an addiction second to none. Furthermore, if you get on the Racing Train at the wrong stop, well, every stop after that is the wrong stop. If we can help, feel free to let us know right here. Adam Landolfi www.IWantThatMusclecar.com 732 462 0911 732 995 2070

01-01-2007, 10:06 PM	#3
TheGoodBadGuy Junior Member Join Date: Dec 2002 Location: USA Posts: 47 Likes: 0 Liked 0 Times in 0 Posts	Hi, Oliver Steel Rods....the best money can buy as far as I know. The engine made 877 @ 7100. I usually pull it to 7600, it has made 920. The dyno guy was timid because I wasn't there, better safe I guess. It also make insane torque that is more like a telephone pole than a curve, peak was 745 but it had 730 @ 4600 and 690 @6500 That will get it done. It's been 9.00 151 off the foot brake on real 10" tires in a camaro. It's all fresh right now, we dynoed it last week. There is no better engine at a price even close to this. Adam 732 995 2070 Adam Landolfi www.LandysPerformance 732 462 0911 __________________ www.LandysPerformance.com. Established in 1968 by \"Coney Island Ralph\" Landolfi, my Dad, we have the experience and the compassion to help any racer with any questions. Drag Racing is an addiction second to none. Furthermore, if you get on the Racing Train at the wrong stop, well, every stop after that is the wrong stop. If we can help, feel free to let us know right here. Adam Landolfi www.IWantThatMusclecar.com 732 462 0911 732 995 2070

01-01-2007, 10:08 PM	#4
TheGoodBadGuy Junior Member Join Date: Dec 2002 Location: USA Posts: 47 Likes: 0 Liked 0 Times in 0 Posts	oh yea, that camaro weighed 3450 Adam Landolfi www.LandysPerformance 732 462 0911 __________________ www.LandysPerformance.com. Established in 1968 by \"Coney Island Ralph\" Landolfi, my Dad, we have the experience and the compassion to help any racer with any questions. Drag Racing is an addiction second to none. Furthermore, if you get on the Racing Train at the wrong stop, well, every stop after that is the wrong stop. If we can help, feel free to let us know right here. Adam Landolfi www.IWantThatMusclecar.com 732 462 0911 732 995 2070

01-03-2007, 09:10 PM	#5
TheGoodBadGuy Junior Member Join Date: Dec 2002 Location: USA Posts: 47 Likes: 0 Liked 0 Times in 0 Posts	The deal fell through....what else is new....anyway, it's still available. I may put it back on the dyno with the right headers and swing it to 7600. I wonder if it will sell if it makes 920. Adam Adam Landolfi www.LandysPerformance 732 462 0911 __________________ www.LandysPerformance.com. Established in 1968 by \"Coney Island Ralph\" Landolfi, my Dad, we have the experience and the compassion to help any racer with any questions. Drag Racing is an addiction second to none. Furthermore, if you get on the Racing Train at the wrong stop, well, every stop after that is the wrong stop. If we can help, feel free to let us know right here. Adam Landolfi www.IWantThatMusclecar.com 732 462 0911 732 995 2070

01-08-2007, 10:40 PM	#6
TheGoodBadGuy Junior Member Join Date: Dec 2002 Location: USA Posts: 47 Likes: 0 Liked 0 Times in 0 Posts	It's hard to believe that an engine like this won't sell. It makes me feel old. Well, I gave it away today to a kid who hangs around the shop. Now I feel better. But, not any younger. Adam Landolfi www.LandysPerformance 732 462 0911 __________________ www.LandysPerformance.com. Established in 1968 by \"Coney Island Ralph\" Landolfi, my Dad, we have the experience and the compassion to help any racer with any questions. Drag Racing is an addiction second to none. Furthermore, if you get on the Racing Train at the wrong stop, well, every stop after that is the wrong stop. If we can help, feel free to let us know right here. Adam Landolfi www.IWantThatMusclecar.com 732 462 0911 732 995 2070

01-01-2007, 09:49 PM	#2
6682Bktrcr Junior Member Join Date: Sep 2006 Location: Nesconset New York Posts: 21 Likes: 0 Liked 0 Times in 0 Posts	are they aluminum rods how much hp about.Thanks Louie Louie