I think I found my problem????????

BillK · 09-24-2011, 10:30 PM

Art,
Which engine is this ? I see a pin in the front of the one cam but not in the other ?

Adger Smith · 09-25-2011, 12:29 AM

You said I would hear a big Yahooo all the way from Georgia when you found it. You must be out of breath from working on it so hard!!!
I ask you that 3 weeks ago... I'm going to have to whoop you!! I'm sure going to miss our long conversations about your little screamer. It did help me understand your system. Now we can see if all that injector location and port shape/size works... HA!! YES!! Joe, I'm going to miss your input, too. Very informative. Thanks. OH, Art. The card game I left you for tonight was a draw.... :~) I had to play with the big cards so I could see what was in my hand. Did pretty good for a guy blind in one eye that can't see out of the other. ;~)

Tom keedle · 09-25-2011, 10:10 AM

don't suppose you have a lot of spring pressure and that it's making the cam move in the cam gear?
if so, can you pin it in place?
my experiance with DOHC neons is on daily driver stuff...

art leong · 09-25-2011, 10:13 AM

Quote:

Originally Posted by BillK

Art,
Which engine is this ? I see a pin in the front of the one cam but not in the other ?

The pin on the intake cam is on the up side, the exhaust cam is on the down side.
I'm going to get some square stock turned on a lathe to fit in the holes on the top of the cams. And make a jig up to hold them.

Adger Smith · 09-25-2011, 11:29 AM

Art, I have an idea for a design. Call me

09-24-2011, 10:30 PM	#1
BillK Member Join Date: Nov 2005 Location: Waldorf Md Posts: 230 Likes: 12 Liked 30 Times in 17 Posts	Re: I think I found my problem???????? Art, Which engine is this ? I see a pin in the front of the one cam but not in the other ? __________________ Bill Koustenis

09-25-2011, 12:29 AM	#2
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: I think I found my problem???????? You said I would hear a big Yahooo all the way from Georgia when you found it. You must be out of breath from working on it so hard!!! I ask you that 3 weeks ago... I'm going to have to whoop you!! I'm sure going to miss our long conversations about your little screamer. It did help me understand your system. Now we can see if all that injector location and port shape/size works... HA!! YES!! Joe, I'm going to miss your input, too. Very informative. Thanks. OH, Art. The card game I left you for tonight was a draw.... :~) I had to play with the big cards so I could see what was in my hand. Did pretty good for a guy blind in one eye that can't see out of the other. ;~) __________________ Adger Smith (Former SS) Last edited by Adger Smith; 09-25-2011 at 12:34 AM. Reason: sp

09-25-2011, 10:10 AM	#3
Tom keedle Senior Member Join Date: Dec 2008 Location: Berthoud, Coloraduh Posts: 695 Likes: 13 Liked 8 Times in 7 Posts	Re: I think I found my problem???????? don't suppose you have a lot of spring pressure and that it's making the cam move in the cam gear? if so, can you pin it in place? my experiance with DOHC neons is on daily driver stuff...

09-25-2011, 11:29 AM	#5
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: I think I found my problem???????? Art, I have an idea for a design. Call me __________________ Adger Smith (Former SS)