|
|
![]() |
#1 |
VIP Member
Join Date: Mar 2007
Posts: 2,462
Likes: 620
Liked 1,948 Times in 589 Posts
|
![]()
I also used the Aerospace brakes on my Camaro. The brakes fit well and the install was very easy. There were a few holes that I had to chase with a tap. Once the brakes were installed they worked flawlessly and the braking is miles ahead of the drum brakes. You do have to be somewhat mechanically inclined to do the job and be able to follow directions. I bought my brake kits through ART in St Petersburg Fl. Aerospace is also located in St Petersburg. I thought the quality was in line with the cost.
__________________
Mike Pearson 2485 SS |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 2,002
Likes: 64
Liked 783 Times in 195 Posts
|
![]()
Street car or race car? For a street car, I recommend the Stainless products over true race car stuff - much more durable.
|
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Aug 2002
Location: Fayetteville, n.c.
Posts: 1,411
Likes: 0
Liked 1 Time in 1 Post
|
![]()
Greg,
We used Aerospace on "OUR" Nova worked good. I also put a set on my Camaro. Very easy installation and almost a year and 400 runs later still stopping. Chip |
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Jan 2003
Location: jackson
Posts: 1,165
Likes: 0
Liked 5 Times in 3 Posts
|
![]()
Thanks guys! The car is a 12. second Street/Strip car it has manual drums all the way around now & dose not stop well!
__________________
Greg Fulk 308 308X P/SA "ALL AMERICAN" |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Jun 2007
Posts: 76
Likes: 3
Liked 0 Times in 0 Posts
|
![]()
I put wilwood disc brake's on the front of my 67 camaro, easiest swap I ever did. Stopped great going 9.50s
__________________
Tim Blount S/C Q/R 310T |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jun 2007
Posts: 953
Likes: 575
Liked 203 Times in 80 Posts
|
![]()
They were very easy for me also and the cheapest way to put dual piston calipers on my car. Everything fit perfect.
__________________
Mike Fuller 396 STK 3961 SS |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Dec 2006
Posts: 589
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I adapted the front brakes off a 2001 Z/28. Easy swap and big brakes. Bought the calipers and rotors off ebay for $200.00 and made the caliper brackets.
|
![]() |
![]() |
![]() |
|
|