Dana 60 w/magnetic collar - Page 2

SGSST109E · 03-06-2009, 08:52 PM

On my dana I turned the ID of the collar with the magnets so I could clamp it to the dust shield on the spicer yoke. I may have put some bearing locktite on it too. Hasn't moved in three years.

Shawn Blair · 03-06-2009, 10:13 PM

A friend of mine had the standard yoke on his Dana, but he wanted to install a ring without spending the money on a new yoke, so we just chucked it up in the lathe and cut a recess in the yoke to install the ring. It looks just like the yoke's that were made for the ring when your done and it's holding up fine in his manual stocker. Shawn

03-06-2009, 08:52 PM	#11
SGSST109E Member Join Date: Jun 2007 Location: NJ Posts: 351 Likes: 62 Liked 126 Times in 61 Posts	Re: Dana 60 w/magnetic collar On my dana I turned the ID of the collar with the magnets so I could clamp it to the dust shield on the spicer yoke. I may have put some bearing locktite on it too. Hasn't moved in three years.

03-06-2009, 10:13 PM	#12
Shawn Blair Member Join Date: Dec 2007 Location: Everson, WA. Posts: 122 Likes: 1 Liked 0 Times in 0 Posts	Re: Dana 60 w/magnetic collar A friend of mine had the standard yoke on his Dana, but he wanted to install a ring without spending the money on a new yoke, so we just chucked it up in the lathe and cut a recess in the yoke to install the ring. It looks just like the yoke's that were made for the ring when your done and it's holding up fine in his manual stocker. Shawn __________________ Shawn Blair 6383 SS 634 STK