Launch RPM question

Mike Pearson · 01-21-2009, 08:32 AM

Frank,

I have an early camaro SS/IA. I had a large oil pan on it that I had to lower the drag link to clear the pan. That caused the bump steer issue. Now I have an oil pan that clesrs the steering in the stock location. I re aligned the front end and checked the bump steer and it was less than 1/2 inch.

Frank Bialas · 01-21-2009, 12:30 PM

Mike thank you for your reply, looking for quick-fix

Joe thank you for your reply, you might be onto something, good luck with your new combo.

Smitty didn't mean to change your topic, but just a bit over idle or like Joe side it could do the monster mash !!!

01-21-2009, 08:32 AM	#1
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,435 Likes: 609 Liked 1,903 Times in 571 Posts	Re: Launch RPM question Frank, I have an early camaro SS/IA. I had a large oil pan on it that I had to lower the drag link to clear the pan. That caused the bump steer issue. Now I have an oil pan that clesrs the steering in the stock location. I re aligned the front end and checked the bump steer and it was less than 1/2 inch. __________________ Mike Pearson 2485 SS

01-21-2009, 12:30 PM	#2
Frank Bialas Member Join Date: Sep 2007 Location: NJ Posts: 252 Likes: 6 Liked 23 Times in 13 Posts	Re: Launch RPM question Mike thank you for your reply, looking for quick-fix Joe thank you for your reply, you might be onto something, good luck with your new combo. Smitty didn't mean to change your topic, but just a bit over idle or like Joe side it could do the monster mash !!! __________________ Frank Bialas 1570 STK