|
|
10-24-2014, 08:42 PM
|
#21 |
|
Member
Join Date: Feb 2009
Location: Coraopolis, Pa.
Posts: 172
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Rocker Arms---Does an official clarification exist
I think the response to the question is being misinterpreted....there is a spec for total valve lift and a rocker ratio listed in the spec.....what Bruce said was " the cam lobe lift checked with a solid lifter and the numbers are good you are all set to go ".....in this case your rocker ratio better be correct or you will be bounced, I personally wouldn't mess with taking a chance on that...too expensive of a mistake......
D L Rambo......Stk 1300 |
|
|
|
10-24-2014, 09:11 PM
|
#22 | |
|
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,794
Likes: 2,884
Liked 5,087 Times in 1,938 Posts
|
Re: Rocker Arms---Does an official clarification exist
Quote:
" AS LONG AS THE CAM LIFT, CHECKED WITH A SOLID LIFTER, DOES NOT EXCEED THE SPEC YOU ARE ALL SET "
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers |
|
|
|
|
|
10-24-2014, 10:10 PM
|
#23 |
|
Member
Join Date: Dec 2013
Posts: 311
Likes: 2
Liked 9 Times in 8 Posts
|
Re: Rocker Arms---Does an official clarification exist
I wish I could use a .502 lobe on my combo
 but the book says "cam lift" and we all know what that means |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
