Stock eliminator Lifters

Bob Gullett · 02-11-2020, 11:02 PM

Quote:

Originally Posted by rod butcher

Will wipe out cam lobes.

Ppp lifter have a coated lifter with a coating that is safe for a cast cam. In my spare engine I took out the shubeck grenades and installed them on a cast cam. Broke them in as if it was a new cam and lifters with break in oil. Valve setting never moved. Took them all out after to inspect them and they looked like they came out of the box.

ron mattson · 02-12-2020, 09:09 AM

On billet or tool steel cams I would run the
dlc lifters with no oil hole as the hole just creates
a place for the dlc to not stick or flake off.
On cast cams I would use the ones with the hole
and have coated with a lubricity coating like
Micro blue, have the cam nitrided and coated also.
And as Bob said Pppc has a dlc that will work
on a cast cam also.

littlemanjoe · 02-12-2020, 11:39 AM

Ron, Your saying nitride my steel cam and use DLC lifters correct?

Do you guys break in with a lighter spring?

Thank you guys so much for your help. This is my first stocker build and I want it to live.

ron mattson · 02-12-2020, 06:45 PM

I would nitride a cast cam for use with tool steel
lifters.

65signet · 02-13-2020, 06:09 PM

I always use a light spring for break in

Rose Racing · 02-24-2020, 10:00 PM

How much does a set of Precision or Trend Lifters go for?

carlm · 12-16-2021, 09:18 PM

I talked with Jason at Trend today.. they only have tool steel solids, can we now run these in stk??
Been out of this for a long time.
I have schubecks now. 440 6 pk cst cam, precision rocker shafts with crane adjustable
He said they have econo lifters. They were in my price range

dragracerray · 12-17-2021, 11:59 AM

Quote:

Originally Posted by Bob Gullett

Ppp lifter have a coated lifter with a coating that is safe for a cast cam. In my spare engine I took out the shubeck grenades and installed them on a cast cam. Broke them in as if it was a new cam and lifters with break in oil. Valve setting never moved. Took them all out after to inspect them and they looked like they came out of the box.

Bob what did the Ppp coated lifter (that was safe for a cast cam) cost?
Merry Christmas, Ray
Glad to see you racing in the US this year!! You were flyiiiinnnn!

carlm · 12-17-2021, 08:08 PM

Can you clean schubeck lifters in ultra sonic ?

Larry Hill · 12-17-2021, 09:00 PM

Pull them apart and clean them

02-12-2020, 09:09 AM	#2
ron mattson Member Join Date: Nov 2005 Location: cloquet mn Posts: 466 Likes: 17 Liked 67 Times in 30 Posts	Re: Stock eliminator Lifters On billet or tool steel cams I would run the dlc lifters with no oil hole as the hole just creates a place for the dlc to not stick or flake off. On cast cams I would use the ones with the hole and have coated with a lubricity coating like Micro blue, have the cam nitrided and coated also. And as Bob said Pppc has a dlc that will work on a cast cam also. __________________ Ron Mattson 5015 STK

02-12-2020, 11:39 AM	#3
littlemanjoe Member Join Date: Feb 2018 Location: West Layfayette Posts: 125 Likes: 195 Liked 75 Times in 28 Posts	Re: Stock eliminator Lifters Ron, Your saying nitride my steel cam and use DLC lifters correct? Do you guys break in with a lighter spring? Thank you guys so much for your help. This is my first stocker build and I want it to live.

02-12-2020, 06:45 PM	#4
ron mattson Member Join Date: Nov 2005 Location: cloquet mn Posts: 466 Likes: 17 Liked 67 Times in 30 Posts	Re: Stock eliminator Lifters I would nitride a cast cam for use with tool steel lifters. __________________ Ron Mattson 5015 STK

02-13-2020, 06:09 PM	#5
65signet Member Join Date: May 2010 Location: El Dorado Ca. Posts: 123 Likes: 299 Liked 49 Times in 22 Posts	Re: Stock eliminator Lifters I always use a light spring for break in __________________ Steven Barnes Stock 704 N/SA

02-24-2020, 10:00 PM	#6
Rose Racing Member Join Date: Jan 2012 Location: Sandusky, Ohio Posts: 353 Likes: 95 Liked 226 Times in 74 Posts	Re: Stock eliminator Lifters How much does a set of Precision or Trend Lifters go for?

12-16-2021, 09:18 PM	#7
carlm Junior Member Join Date: Jan 2005 Posts: 10 Likes: 3 Liked 3 Times in 1 Post	Re: Stock eliminator Lifters I talked with Jason at Trend today.. they only have tool steel solids, can we now run these in stk?? Been out of this for a long time. I have schubecks now. 440 6 pk cst cam, precision rocker shafts with crane adjustable He said they have econo lifters. They were in my price range

12-17-2021, 08:08 PM	#9
carlm Junior Member Join Date: Jan 2005 Posts: 10 Likes: 3 Liked 3 Times in 1 Post	Re: Stock eliminator Lifters Can you clean schubeck lifters in ultra sonic ?

12-17-2021, 09:00 PM	#10
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,648 Likes: 1,941 Liked 10,756 Times in 2,236 Posts	Re: Stock eliminator Lifters Pull them apart and clean them __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode