Starting line hesitation

DIV3CR · 07-12-2015, 01:46 PM

Thank you all for your come backs. The car has a 3700 RPM
chip in the 2 Step. Fuel pressure on line is 6 lb.The engine
recovers quickly. The last run it did it twice one after another.
This is a Danny Ashley Qjet built in 2012 I don't want make any
adjustment to the carb. The carb work great before.
. I removed the top to install plugs in carb because I
am now running a two step.I removed the plugs and used the foot
brake, same thing. I also installed a lifter valley baffle could this
ad to the problem
Thanks for your time
Bob Keller

07-12-2015, 01:46 PM	#7
DIV3CR Junior Member Join Date: Oct 2011 Location: WISCONSIN Posts: 50 Likes: 0 Liked 3 Times in 1 Post	Re: Starting line hesitation Thank you all for your come backs. The car has a 3700 RPM chip in the 2 Step. Fuel pressure on line is 6 lb.The engine recovers quickly. The last run it did it twice one after another. This is a Danny Ashley Qjet built in 2012 I don't want make any adjustment to the carb. The carb work great before. . I removed the top to install plugs in carb because I am now running a two step.I removed the plugs and used the foot brake, same thing. I also installed a lifter valley baffle could this ad to the problem Thanks for your time Bob Keller Last edited by DIV3CR; 07-12-2015 at 01:53 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode