Tire Pressure

gearjammer · 08-25-2008, 03:51 PM

While my chassis is not legal for Stock Eliminator I am building it somewhat by S/E design and I'm having an initial traction problem. I'm being told to run no more tire pressure than 15 PSI in the Radial Slick and I'm wondering what you folks run for those of you that run this type of tire.

I am running a 30x9 MT ET Drag Radial mounted on a 10" wheel with 19 PSI

Caltrac's with 1/4 turn preload w/ drivers weight
Rancho 9000 shocks set on #4
Calvert split mono leaf springs
Anti roll bar (zero preload)
AFCO low friction ball joints & bushings
Moroso Trick Springs
Lakewood 90/10 shocks (8" of travel)

Thanks in advance for your help

Phil

08-25-2008, 03:51 PM	#1
gearjammer Junior Member Join Date: Mar 2008 Location: Troy, MI Posts: 43 Likes: 0 Liked 0 Times in 0 Posts	Tire Pressure While my chassis is not legal for Stock Eliminator I am building it somewhat by S/E design and I'm having an initial traction problem. I'm being told to run no more tire pressure than 15 PSI in the Radial Slick and I'm wondering what you folks run for those of you that run this type of tire. I am running a 30x9 MT ET Drag Radial mounted on a 10" wheel with 19 PSI Caltrac's with 1/4 turn preload w/ drivers weight Rancho 9000 shocks set on #4 Calvert split mono leaf springs Anti roll bar (zero preload) AFCO low friction ball joints & bushings Moroso Trick Springs Lakewood 90/10 shocks (8" of travel) Thanks in advance for your help Phil __________________ Phil JPR Motorsports 1972 Nova Street Strip Project Last edited by gearjammer; 08-25-2008 at 03:52 PM. Reason: added 2nd pic