Brake Pressure Switch for launch control ???

SDT1DYI · 06-27-2024, 09:38 PM

Folk Race cars closed. The switch you want has an adjustable pressure Range 100 to 1000 PSI. 3 wires. Black wire is not used.
Recommend wiring power to it thru a 3rd gear micro switch.
Power is removed to the BPS when in 3rd gear ( if a 3sp Auto)
This will allow you to apply brakes at 1,000 and the 2 step will not be activated.
Set up a LED light in the circuit so you know when the 2 step is powered up with right brake PSI
Believe they are 200.00 or so.

Steve Teeter Stk/SS 620

06-27-2024, 09:38 PM	#4
SDT1DYI Member Join Date: Nov 2016 Location: Indianola Washington Posts: 403 Likes: 0 Liked 455 Times in 147 Posts	Re: Brake Pressure Switch for launch control ??? Folk Race cars closed. The switch you want has an adjustable pressure Range 100 to 1000 PSI. 3 wires. Black wire is not used. Recommend wiring power to it thru a 3rd gear micro switch. Power is removed to the BPS when in 3rd gear ( if a 3sp Auto) This will allow you to apply brakes at 1,000 and the 2 step will not be activated. Set up a LED light in the circuit so you know when the 2 step is powered up with right brake PSI Believe they are 200.00 or so. Steve Teeter Stk/SS 620