make small hot tank

Dan Lattimore · 01-13-2019, 01:43 AM

Just for the home shop and the inconvenience of dragging everything but the 50 year old seriously gooood up stuff to the machine shop --- I cut a house heating oil drum in two and shortened the legs , bolted two pieces of angle iron to the back, cut a piece of 3/4 " plywood for a cover and hinged it to the angle iron. Placed an old fireplace grate in the bottom , drilled a bunch of holes in a piece of 3/8 brake line with a valve and laid it under the grate for aeration . welded a bung in each end and screwed in two heating elements and the thermostat set at 180 from an old hot water heater. Used nothing but ( Tide ) . Took a little longer but smelled great. ------ Put it outside on the concrete pad and used the engine hoist for blocks. As they say " it worked for me"

01-13-2019, 01:43 AM	#11
Dan Lattimore Member Join Date: Jan 2003 Location: Beaverdam, Va./ Port St. Lucie,Fla. Posts: 362 Likes: 177 Liked 154 Times in 37 Posts	Re: make small hot tank Just for the home shop and the inconvenience of dragging everything but the 50 year old seriously gooood up stuff to the machine shop --- I cut a house heating oil drum in two and shortened the legs , bolted two pieces of angle iron to the back, cut a piece of 3/4 " plywood for a cover and hinged it to the angle iron. Placed an old fireplace grate in the bottom , drilled a bunch of holes in a piece of 3/8 brake line with a valve and laid it under the grate for aeration . welded a bung in each end and screwed in two heating elements and the thermostat set at 180 from an old hot water heater. Used nothing but ( Tide ) . Took a little longer but smelled great. ------ Put it outside on the concrete pad and used the engine hoist for blocks. As they say " it worked for me" __________________ 66W30POST