Starting line hesitation

[Mike Pearson]

Originally Posted by Monte Howard

Since Danny built it, I am ruling out the air door to loose. I would try a new choke pull-off, I have had several of them go bad and cause the same issue. Pull the vacum hose off and push the arm in, with the arm pushed in hold your finger over the vacum port. Let go your finger off the vacum port and make sure the arm comes out smoothly. If it starts coming out and then hangs up for a second it's bad.

Let us know if you figure out the stumble in your carb. We have a Danny Ashley prepared Q jet that does the same thing and we have not been able to get it fixed. It's a real nice carb and Danny does nice work so we would realy like to get it running right.