Manhattan Speed Parts '1968 Hemi Dart'

Paul Ceasrine · 01-06-2015, 06:01 PM

1968 Modified Production

Yes, the NHRA required the same 'stupid' rule.

Exhaust pipes were required, and replacement production-type Mufflers had to be 18" in length.

The Mufflers had to be placed in the 'stock location', or if
they were originally installed behind the Rear-Axle, they
could be re-positioned in front of the Axle.

The Exhaust Outlets had to exit equal to the center-line
of the Rear-Axle.

Here is the Motion Performance A/MP 1968 Camaro.

01-06-2015, 06:01 PM	#17
Paul Ceasrine VIP Member Join Date: Apr 2009 Posts: 2,546 Likes: 0 Liked 10 Times in 10 Posts	Re: Manhattan Speed Parts '1968 Hemi Dart' *1968 Modified Production* Yes, the NHRA required the same 'stupid' rule. Exhaust pipes were required, and replacement production-type Mufflers had to be 18" in length. The Mufflers had to be placed in the 'stock location', or if they were originally installed behind the Rear-Axle, they could be re-positioned in front of the Axle. The Exhaust Outlets had to exit equal to the center-line of the Rear-Axle. Here is the Motion Performance A/MP 1968 Camaro. Last edited by Paul Ceasrine; 01-06-2015 at 06:24 PM.