Clutch disc

Stick Racing · 03-18-2012, 04:06 PM

I have rung the spines out of a clutch hub this week. After careful inspection, I have discovered that the disc I bought form Bonninfante has splines that are approx .300 long in the hub. I picked up a disc from Ram and measured the splines in their hub to be approx .420 long. I would like to just replace the hub on the disc without buying a new disc. The flywheel and PP show very little wear. Would like to swap hub for the thicker Ram piece.
Anyone try to mix hubs on discs?

Andy Stone
___________________________________________

1102 A/S 1112 SS/C

03-18-2012, 04:06 PM	#1
Stick Racing Member Join Date: Mar 2007 Posts: 169 Likes: 4 Liked 0 Times in 0 Posts	Clutch disc I have rung the spines out of a clutch hub this week. After careful inspection, I have discovered that the disc I bought form Bonninfante has splines that are approx .300 long in the hub. I picked up a disc from Ram and measured the splines in their hub to be approx .420 long. I would like to just replace the hub on the disc without buying a new disc. The flywheel and PP show very little wear. Would like to swap hub for the thicker Ram piece. Anyone try to mix hubs on discs? Andy Stone ___________________________________________ 1102 A/S 1112 SS/C